User manual CANON IMAGEPROGRAF 9000S BROCHURE

[. . . ] Considerable effort has been made to ensure that the manuals for the machine are free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon. The machine illustration on the cover may differ slightly from your machine. i What Can I Do with This Machine? What Can I Do with This Machine? Copy Features Select a scan mode depending on the type of image Image Quality p. 4-3 ABC ABC ABC ABC Adjust the density level of scanned images Density p. [. . . ] Press [Image Quality] repeatedly to select the document type. <TEXT/PHOTO>: For documents that contain text and photos. <PHOTO>: For documents that contain fine text or photos. <TEXT/PHOTO+>: For documents that contain fine text and photos. NOTE Copy density automatically changes to the manual mode when <TEXT/PHOTO>, <PHOTO>, or <TEXT/PHOTO+> is set. 4-3 Density You can adjust the density to the most appropriate level for the document either automatically or manually. Adjusting Automatically 2 1 Copying [OK] 1 2 Press [COPY]. Press [Density] repeatedly until <AUTO> appears, then press [OK]. NOTE The image quality is automatically set to <TEXT>. 4-4 Adjusting Manually 2 1 3 Copying [OK] 1 2 3 Press [COPY]. Press [Density] repeatedly to select the manual mode. Ex. DENSITY -LT DK+ Press [ [ [ ] or [ ] to adjust the copy density, then press [OK]. ]: to make light documents darker ]: to make dark documents lighter 4-5 Zoom Ratio Preset Zoom You can enlarge or reduce documents from one standard paper size to another. 2 1 3 Copying [OK] 1 2 3 Press [COPY]. Press [ ­ ­ ­ ­ ­ ] or [ ] to select the copy ratio, then press [OK]. 200% MAX. 141% A5 A4 100% 70% A4 A5 50% MIN. NOTE When <PAPER SIZE GROUP> in the <COPY SETTINGS> menu is set to <INCHES> or <AB>, the preset copy ratios change as follows: INCHES: 50%, 64%, 78%, 100%, 129%, 200% AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200% 4-6 Zoom Designation You can reduce or enlarge images by any copy ratio, in 1% increments. The available copy ratios are from 50% to 200%. 2 1 3 Copying [OK] 1 2 3 Press [COPY]. Enter the copy ratio with the numeric keys, then press [OK]. Ex. ZOOM 50-200% 100% + ]. You can also use [ ] or [ ] to adjust the zoom ratio. When finished, the display returns to the standby mode. NOTE ­ Use standard paper as the cleaning paper. ­ Throw away the cleaning paper after use. Cleaning the roller takes approximately 130 seconds. 1 2 Maintenance Press [Additional Functions]. Press [ ] or [ ] to select <ADJUST. /CLEANING>, then press [OK]. Load a sheet of blank A4 paper in the multi-purpose tray. 3 7-5 Scanning area Keep the scanning area clean to avoid dirty copies. 3 Close the platen glass cover. 1 Open the platen glass cover. CAUTION Be careful not to get your fingers caught. 2 Clean the platen glass and the underside of the platen glass cover with a cloth dampened with water. Then, wipe the area with a soft, dry cloth. Maintenance NOTE Do not dampen the cloth too much, as this may tear the document or damage the machine. 7-6 Replacing the Toner Cartridge When the printout has vertical white streaks redistribute the toner inside the cartridge. If the problem persists, replace the cartridge. 3 Remove the toner cartridge. Redistributing Toner 1 Lift the scanning platform (A) until it is locked. A 4 Gently rock the toner cartridge five or six times to distribute toner evenly. Maintenance 2 Open the printer cover (B), using the tab (A) which covers over on dent. A B 7-7 5 Hold the toner cartridge by its handle (A). The arrow (A) on the toner cartridge should be facing away from you and pointing down. 7 Push the toner cartridge to make sure it is properly set in the machine. A CAUTION 8 ­ Do not open the drum protective shutter on the toner cartridge. Print quality may deteriorate if the drum surface is exposed to light or is damaged. NOTE Close the printer cover using the tab. Maintenance ­ Always hold the toner cartridge by its handle. 6 Insert the cartridge so that the protrusion on the right side of the toner cartridge (A) fits into the guide (B) located on the right side of the machine and slide it down parallel to the guide. 9 Close the scanning platform. A B CAUTION Be careful not to get your fingers caught. 7-8 Replacing the Toner Cartridge with a New One 3 Remove the toner cartridge. 1 Lift the scanning platform (A) until it is locked. A 4 2 Maintenance Remove the new toner cartridge from the protective bag. Open the printer cover (B), using the tab (A) which covers over on dent. A NOTE Save the protective bag. You may need it later when you remove the toner cartridge from the machine. 5 B Gently rock the toner cartridge five or six times to distribute toner inside. 7-9 6 Hold the toner cartridge with one hand, and pull out the seal completely. 8 Insert the cartridge so that the protrusion on the right side of the toner cartridge (A) fits into the guide (B) located on the right side of the machine and slide it down parallel to the guide. A NOTE Do not pull out the seal at an angle. 7 Hold the toner cartridge by its handle. The arrow (A) on the toner cartridge should be facing away from you and pointing down. B 9 Push the toner cartridge to make sure it is properly set in the machine. Maintenance A CAUTION Do not open the drum protective shutter on the toner cartridge. Print quality may deteriorate if the drum surface is exposed to light or is damaged. NOTE Always hold the toner cartridge by its handle. 7-10 10 Close the printer cover using the tab. 11 Close the scanning platform. Maintenance CAUTION Be careful not to get your fingers caught. 7-11 Transporting the Machine Follow this procedure to avoid vibration damage to the machine when transporting it over a long distance. 5 Remove the toner cartridge. 1 2 3 Turn off the main power switch. Disconnect the power cord and all the cables from the back of the machine. Lift the scanning platform (A) until it is locked. CAUTION A ­ To avoid exposing the toner cartridge to light, place it in its protective bag or wrap it in a thick cloth. [. . . ] (See "Setting Paper Size and Type, " on p. 3-7. ) COMMON SETTINGS Setting Item 1 DEFAULT SETTINGS Description Selects which standby display appears when the main power switch is turned on. ­ COPY ­ SCAN Sets whether to reduce toner consumption. ­ OFF ­ ON Selects the language on the display. [. . . ]