User manual CANON IMAGEPROGRAF IPF765 MFP M40 CANON_PROFESSIONAL_PRODUCT_GUIDE_NEW.PDF

[. . . ] The number of characters of response to Status Read Commands depends on commands. Characters for commands must be Capital (A - Z). -3- LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/IMAGEPROGRAF IPF765 MFP M40/LV-7297M/ LV-8227M/ LV-7292S/LV-7297S/LV-7392S Basic Serial Command Specifications ４．Functional Execution Command Table Command C00 C01 C02 C03 C04 C05 C06 C07 C08 C09 C0A C0B C0C C0D C0E C0F C10 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C1A C1B C1C C1D C1E C1F Item POWER ON POWER OFF (Quick Power OFF) POWER OFF ――― HDMI Computer ――― Video ――― VOLUME + VOLUME AUDIO MUTE ON AUDIO MUTE OFF VIDEO MUTE ON VIDEO MUTE OFF Aspect Normal size Aspect 16：9 size Aspect Full size Image Standard High Contrast Image Cinema User 1 User 2 User 3 User 4 Blackboard Presentation ――― ――― MENU ON MENU OFF DISPLAY CLEAR ――― Command C20 C21 C22 C23 C24 C25 C26 C27 C28 C29 C2A C2B C2C C2D C2E C2F C30 ――― C31 C32 C33 C34 C35 C36 C37 C38 C39 C3A C3B C3C C3D C3E C3F Item BRIGHTNESS + BRIGHTNESS ――― ――― ――― ――― ――― IMAGE (Toggle) Direct power on Enable Direct power on Disable Power management mode Standby Power Management mode OFF ――― ――― Power management mode Exit ――― D. €œC” COMMAND [CR] Command: two characters (See Basic Functional Execution Command Table) A projector changes received data to decode and returns a result after being ready to receive next command. [. . . ] POWER OFF Command (Quick Power OFF) Command Detail “C01” [CR] Power OFF (Standby) When Power is OFF with ON/STAND-BY button of the projector and remote control, “Power OFF?However, as soon as this command is sent, Quick Power OFF is executed. The command operates the same Power OFF function as ON/STAND-BY button of the projector and remote control. If this command is sent again while it is displayed, Power OFF is executed. When sending this command during Countdown, Countdown is terminated. HDMI Command (Except LV-7292S/LV-7297S/LV-7392S ) Command Detail “C04” [CR] Select HDMI Input Although projector returns “OK”, Auto input is not executed with this command while Auto input is set to On1/On2. Computer Command Command Detail “C05” [CR] Select Computer Input Although projector returns “OK”, Auto input is not executed with this command while Input search is set to On1 or On2, Acceptable Unacceptable [ACK] [CR] “？”[CR] Response -9- LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/IMAGEPROGRAF IPF765 MFP M40/LV-7297M/ LV-8227M/ LV-7292S/LV-7297S/LV-7392S Basic Serial Command Specifications 6. Video Command Command Detail “C07” [CR] Select Video Input Although projector returns “OK”, Auto input is not executed with this command while Input search is set to On1 or On2, Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. This command operates the same way as “VOLUME+” button of the projector and remote control2 Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. VOLUME – Command (Except LV-7292S/ LV-7297S/ LV-7392S) Command Detail “C0A” [CR] Volume Down This command operates the same way as “VOLUME-” button of the projector and remote control. This command works the same way as “MUTE” button of the remote control for Mute ON, but does not work for Mute OFF. Although projector returns “OK”, Auto input is not executed with this command while Input Auto input set to On1 or On2, Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. Although projector returns “OK”, Auto input is not executed with this command while Auto input is set to On1 or On2, Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. Although projector returns “OK”, Auto input is not executed with this command while Auto input is set to On1 or On2, Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. This command operates the same as “Auto PC” of main menu. Projector suspends Auto PC operation when receiving this command another time. This command works the same way as “P-TIMER” button of the remote control. This command works the same as holding on the “P-TIMER” button of the remote control Acceptable Unacceptable [ACK] [CR] “？”[CR] Response 6. When a projector receives the appropriate command, it returns a character line as the required data. When the received data cannot be decoded, the projector returns “?Transfer Example Get input mode for projector with basic commands Command(issues a command of getting current input mode) PC → Projector Projector → PC “C” “R” “1” “CR” “1” Processing (A few ms∼1s) (Shows Computer 1 is selected) “CR” Response 7. Status Read Command Command Detail “CR0” [CR] Get the projector’s operating status Acceptable “%1” [CR] ”00” = Power ON “80” = Standby “40” = Countdown in process “20” = Cooling Down in process “10” = Power Failure “28” = Cooling Down in process due to Temperature Anomaly “88” = Coming back after Temperature Anomaly “24” = Power Save/Cooling Down in process “04” = Power Save “21” = Cooling Down is in process after Power off due to lamp failure “81” = Standby after Cooling Down due to lamp failure “? [. . . ] Even if the temperature decreases during this process, Cooling Down is executed. €œ88” [CR] Status: Coming back after temperature anomaly When the status moves to Standby after Cooling Down due to temperature anomaly, it returns “88” [CR]. This shows that the status turns to Standby because of abnormal temperature. -20- LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/IMAGEPROGRAF IPF765 MFP M40/LV-7297M/ LV-8227M/ LV-7292S/LV-7297S/LV-7392S Basic Serial Command Specifications This status maintains until next operation is done. [. . . ]