User manual CANON IMAGERUNNER ADVANCE C5045

[. . . ] However, as we are constantly improving our products, if you need an exact specification, please contact Canon. The machine illustration on the cover may differ slightly from your machine. i TOP Back Previous Next Advanced Fax Features Advanced Copy Features Network 1 2 3 Legal Notices Trademarks Canon, the Canon logo, imageCLASS, and NetSpot are trademarks of Canon Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product and brand names are registered trademarks, trademarks or service marks of their respective owners. [. . . ] Use [ ] or [ ] to select from <IP ADDRESS 1> through <IP ADDRESS 4>, then press [OK]. 25. Use [ ] or [ ] to select <RX MAC ADD SET. >, then press [OK]. ] or [ ] to select <ON> or <OFF>, then press [OK]. <OFF>: Disables a MAC address filter. <ON>: Enables a MAC address filter. NOTE 20. Confirm that <START IP ADDRESS> is displayed, then press [OK]. 21. Use the numeric keys to enter the start IP address, then press [OK]. Remote UI 4 System Monitor 22. Confirm that <END IP ADDRESS> is displayed, then press [OK] If you select <ON>, you will be unable to access from MAC addresses which have not been specified. 27. Use the numeric keys to enter the end IP address, then press [OK]. NOTE ] or [ ] to select from <PERMIT RX ADD1> through <PERMIT RX ADD5>, then press [OK]. to, then press [OK]. Repeat steps 27 and 28 to specify other MAC addresses. 6 Troubleshooting 28. Specify the MAC addresses to allow access 29. Restart the machine. 7 Appendix To enter another IP address range, repeat steps 19 to 23. LPD: This is the print application generally used with TCP/IP. Raw: This is a print application used with Windows 2000/XP/ Server 2003. It can print at higher speeds than LPD. Machine Connection Method (LPD/Raw) 1. Open the printer properties dialog box. ­ For Windows 2000, click [Start] on the Windows task bar [Settings] [Printers]. ­ For Windows XP Professional/Server 2003, click [start] on the Windows task bar [Printers and Faxes]. ­ For Windows XP Home Edition, click [start] on the Windows task bar [Control Panel] [Printers and Other Hardware] [Printers and Faxes]. Remote UI 4 System Monitor 5 Reports and Lists 2. Right-click the icon of the printer you installed select [Properties]. 6 Troubleshooting 7 Appendix 8 Table of Contents Index 3-22 TOP Back Previous Next Advanced Fax Features Advanced Copy Features Network 1 2 3 3. Display the [Ports] sheet by clicking the [Ports] tab. 6. In [Printer Name or IP Address], enter the machine IP address or machine host name click [Next]. Remote UI 4 System Monitor 5 Reports and Lists 6 Troubleshooting 4. 5. Open the [Printer Ports] dialog box by clicking [Add Port]. From [Available ports types], select [Standard TCP/IP Port] click [New Port]. The Add Standard TCP/IP Printer Port Wizard starts. After the computer has confirmed that there is a machine in which the entered IP address is assigned, the [Completing the Add Standard TCP/IP Printer Port Wizard] window appears. 7 Appendix 8 Table of Contents Index 3-23 TOP Back Previous Next Advanced Fax Features Advanced Copy Features Network 1 2 3 8. Click [Finish]. If the dialog box displays [Additional Port Information Required], follow the instructions on the screen to search again, or click [Standard] click [Canon Network Printing Device with P9100] from the pull-down list click [Next]. NOTE 9. Click [Close] to close the [Printer Ports] dialog box. If you want to use Raw, skip to step 11. You can specify a print queue in [Queue Name]. The following three print queues are available: LP: The machine prints according to its spool settings. SPOOL: The machine prints only after spooling a print job on the hard disk, regardless of its spool settings. [. . . ] Low resolution causes font characters and graphics to have a jagged appearance. Higher resolution means smoother curves and angles as well as a better match to traditional typeface designs. Resolution values are represented by horizontal data and vertical data, for example, 600 x 600 dpi. Sending A fax document that has been scanned by a fax machine and sent over telephone lines, in the form of electrical pulses, to another fax machine. Also called TX or Transmit. 5 Reports and Lists Sending speed The rate at which faxes are transmitted through the phone line. [. . . ]