User manual CANON PIXMA IP6000D Easy Setup Instructions

[. . . ] Start Here Easy Setup Instructions Series Photo Printer 1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks 5 Connect the Printer and Load Paper 1 Carefully remove all items from the box. 1 Remove the shipping tape from the front 1 Remove the print head from its package. 1 Peel back the orange tab and completely and back of the printer. remove the plastic wrapper from the Magenta Ink Tank (BCI-6M). IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Plug the power cord into the back of the printer and connect the other end to a power outlet. The printer will initialize. Tear at notch to open 1 TURN THE PRINTER OFF. 2 Connect one end of the USB cable to the computer, the other to the printer. PIXMA iP6000D Series Photo Printer 2 Remove the orange protective cap from 2 Twist off and discard the orange protective cap. the print head. NOTE: Do not touch the print head nozzles and the electrical contacts. POWER Lamp NOTE: To avoid spilling ink, never press on the sides of an ink tank. Protective Cap USB Port USB Cable POWER Button 3 Insert the ink tank into the correct slot. (Refer to the color guide on the print head lock lever). Documentation and Software Kit Print Head Nozzles Press down until the ink tank clicks into place. Electrical Contacts 3 Lower the paper output tray. [. . . ] d. Ensure that letter size paper is loaded in the sheet feeder (top paper feeder). IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions. 5 Follow the on-screen instructions to install the 3 Double-click the PIXMA iP6000D 290. pkg icon, 2 Close any open software applications remaining software. When the "Installation Results" window appears, click OK. 6 Follow the on-screen instructions to register then follow the on-screen instructions. NOTE: When the "Authenticate" screen appears, enter your administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. e. Click the down-arrow to select Test Print. Click the Print Head Alignment icon and follow the on-screen instructions. including anti-virus, computer security and other software. Then insert the Setup Software & User's Guide CD-ROM. The setup program should run automatically. NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup. exe, where D is your CD-ROM drive. 3 When the main menu appears, click c. When the message "The software was successfully installed" appears, click Restart. 7 Start the print head alignment procedure. your product. 7 When the "Print Head Alignment" screen appears, ensure that letter size paper is loaded in the sheet feeder (top paper feeder). Click Execute and follow on-screen instructions. NOTE: When the "Authenticate" screen appears, enter your administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. 4 When the message "The software was a. Double-click the Macintosh HD icon, then Applications folder. Double-click the Utilities folder, then the Printer Setup Utility icon. NOTE: Print head alignment will take several minutes to complete. Easy Install and follow on-screen instructions. successfully installed" appears, click Restart. 5 When a message asking you to align the print b. When the Printer List screen appears, select iP6000D, then click the Utility icon. 8 Click Quit to exit the BJ Printer Utility. [. . . ] All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. [. . . ]