User manual CANON KT20X5B KTS BROCHURE

[. . . ] This will enable the lens to be perfectly compatible with existing provideo and broadcast pan-tilt systems. Moreover, the new remote control SDTV/HDTV lenses are superior to their pro-video counterpartsin the following ways: *Highly accurate gear Backlash reduction in order to cope with the high level requirements of SDTV and HDTV applications. *Improved maximum zoom speed of 1. 0sec compared with the Remote Control Pro-video Lenses. *SDTV and HDTV optical performance and specifications. *Diverse applications include; remote control studio production, point of view cameras, cameras installed in inaccessible locations, as well as many others. [. . . ] Each of these functions have a speed control. There also is a switch for remote or auto iris. Zoom Speed Adjusting Knob TCR-201F The TCR-201F provides more exact control of zoom, focus, and iris through the use of positional servos. There also is a switch for remote or auto iris. Zoom Operation Knob Focus Operation Knob TCR-301F The TCR-301F can present zooming and focusing operations for up to eight shots. Zooming and focusing can be made by pressing the ZOOM/FOCUS/PRESET buttons suited for your application. Iris Speed Adjusting Knob Connector Iris Operation Button Connector Iris Camera/Local Change-Over Switch C CAM. FOCUS F N DIMENSION: 95 95 2±0. 02 82P0. 75 85 8. 5 113. 7 INDEX MARK 162. 3 122 INDEX MARK SWITCH FOR SELECTING AUTO / MANUAL FOCUS Focus Speed Adjusting Knob Connector IRIS O 58. 5 TCR - 101 F Connector IRIS CAM. LOC. TCR - 301 F ZOOM/FOCUS PRESET ZOOM 4 1 2 3 45˚ CONT. 4 20˚ 5˚ SWITCH FOR SELECTING AUTO / MANUAL FOCUS ZOOM FOCUS 40 Iris Camera/Local Change-Over Switch ZOOM W TCR - 201 F FOCUS IRIS CAM. LOC. 40 40 20˚ SWITCH FOR SELECTING AUTO / MANUAL ZOOM 127. 9 SWITCH FOR SELECTING AUTO / MANUAL ZOOM Trimmer Cap Iris Camera/Local Change-Over Switch Preset Position Change Over Button(1~8) Zoom Speed Adjusting Knob Iris Operation Knob Focus Speed Adjusting Knob 5 6 7 8 Manual Operation Change Over SW SLOW W T FAST SLOW N F FAST SLOW C O FAST (80) 91. 4 (80) 95. 5 102 Iris Speed Adjusting Knob Connector W T N F C CAM. 40 53. 3 41 40 40 SWITCH FOR SELECTING AUTO / MANUAL IRIS SWITCH FOR SELECTING AUTO / MANUAL IRIS O Zoom Operation Button Focus Operation Button Zoom Operation Button Focus Operation Button Iris Operation Button (Unit:mm) F. B. ADJUSTING LOCK SCREW 70 ˚ 30˚ 54. 5 68 ZOOM LEVER (TELE POSITION) 68 TRIMMER FOR ADJUSTING IRIS GAIN F. B. ADJUSTING LOCK SCREW ZOOM LEVER (TELE POSITION) 30˚ 68 115. 8 TRIMMER FOR ADJUSTING IRIS GAIN CANON STANDARD CONTROL CABLES CANON provides ready made connection cables in 5m, 10m, 20m, 50m, and 100m lengths. These cables are well shielded to prevent all RF interence. Hirose 12 pin connectors are used exclusively. The cable length can be extended up to 150m by connecting several cables when telecommunications control box TCR-101F/TCR-201F or TCR-301F are used. 1/2 inch Pro-video Remote Control lens Image Format Covered Zoom Ratio Built-in Extender Range of Focal Length Maximum Relative Aperture 1/2" 19X 6. 7~127mm TCC-005M: 5m cable TCC-010M: 10m cable TCC-020M: 20m cable TCC-050M: 50m cable TCC-100M: 100m cable Circuit Diagram YH19x 6. 7 KTS 1/2" 16X 7~112mm 1:1. 9 at 7~106. 4mm 1:2. 0 at 112mm 49. 1˚x37. 8˚ at 7mm 3. 3˚x2. 5˚ at 112mm 1. 0m(10mm with Macro) 83. 3x62. 5cm at 7mm 5. 3x4. 0cm at 112mm 108. 4x80. 8x151. 9mm 0. 94kg (2. 07lbs) Yes 151. 9 29. 3 CONTROL CABLE LENS CABLE YH16x 7 KTS 1/2" 16X 7~112mm Auto Focus Lens YH16x 7 KTS-AF PIG TAIL CABLE CN1 PIG TAIL CABLE(50cm) CN2 FOCUS POSITION(7. 5V)/SPEED(OPEN)SIG 1 ZOOM POSITION(7. 5V)/SPEED(OPEN)SIG 2 GND 3 IRIS LOCAL(0V)/CAMERA(OPEN)SIG 4 IRIS CONTROL (CLOSE 7. 5V/OPEN 2. 5V)* 5 POWER(DC12V) 6 SIGNAL COMMON(+5. 0V) 7 FOCUS CONTROL ( FAR 7. 5V/ NEAR 2. 5V ) 8 ZOOM CONTROL (TELE 7. 5V / WIDE 2. 5V) 9 IRIS POSITION ( 7. 5V )/SPEED ( OPEN ) SIG 10 +V1(+7. 5V) 11 -V1(+2. 5V) 12 TCC • CABLE (5/10/20/50/100m) CONTROLLER CN5 1 2 3 4 5 6 7 8 9 10 11 12 CN3 CN4 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 SPEED CONTROL IRIS MODE CAMERA LOCAL IRIS 10k OPEN FAR FOCUS 10k NEAR TELE ZOOM 10k CLOSE 1:1. 4 at 6. 7~89mm 1:2. 0 at 127mm 51. 1˚x 39. 4˚ at 6. 7mm 2. 89˚x2. 17˚ at 127mm 0. 9m(50mm with Macro) 77. 2x57. 9cm at 6. 7mm 4. 2x3. 2cm at 127mm 114. 5x92. 6x181. 6mm 1. 43kg (3. 15lbs) Yes 95 1:1. 9 at 7~106. 4mm 1:2. 0 at 112mm 49. 1˚x37. 8˚ at 7mm 3. 3˚x2. 5˚ at 112mm 1. 0m(50mm with Macro) 83. 3x62. 5cm at 7mm 5. 3x4. 0cm at 112mm 113. 5x80. 0x148. 8mm 0. 9kg (1. 98lbs) Yes 35. 74 1. 7±0. 2 2±0. 02 VIDEO IN CONNECTOR TO CAMERA WIDE Angular Field of View 4:3 Aspect Ratio M1 IRIS M2 M3 FOCUS ZOOM TCR101F CN6 POSITION CONTROL 1 2 3 4 5 6 7 8 9 10 11 12 IRIS MODE CAMERA CLOSE LOCAL IRIS 10k OPEN FAR FOCUS 10k NEAR TELE 10k ZOOM WIDE M. O. D from Lens Front Object Dimensions 4:3 Aspect Ratio at M. O. D Approx. Size(WxHxL) Approx. Mass Macro *In case of the KTSM version, No. 5 pin is the setup of <CLOSE 2. 5V/OPEN 7. 5V> CANON REMOTE CONTROL LENS Model CN1 2 3 4 5 6 HR10A-10P-12S HR10A-10J-12P HR10A-10P-12S HR10A-10R-12P HR10A-10R-12P MFG HIROSE HIROSE HIROSE HIROSE HIROSE Canon Part No. BH7-0790 BH7-0789 BH7-0790 BH7-0791 BH7-0792 Varies depending on type of Camera. DIMENSION: A 39. 7 29. 3 85 148. 8 39. 7 82P0. 75 72X0. 75 75 82X0. 75 YH19 x6. 7 KTS IX12 19x *In addition, the TCR-301F offers an 8 shot preset memory of zoom and focus. The circuit diagram is the same as the TCR-101F. Extender Circuit Diagram D1 TCR201F 2 CONTROL CABLE YJ19x 9B ITS (with 2x Extender type) 116 181. 63 122 SWITCH FOR SELECTING AUTO / MANUAL FOCUS SWITCH FOR SELECTING AUTO / MANUAL ZOOM M F A M Z A 39. 51 LENS CABLE TRIMMER FOR ADJUSTING IRIS GAIN CAMERA CABLE CONTROL CABLE 116 SWITCH FOR SELECTING AUTO / MANUAL IRIS & ZOOM IRIS GAIN M I A MODEL:HR10A-7R-6P MFG:HIROSE CANON Part No. BH7-1184 CN1 1 2 D3 SW1 M1 D4 102 80 M I A DIP SWITCH TRIMMER FOR ADJUSTING IRIS GAIN AUTO F. B. SWITCH * Extender is controlled by ± 6v on pins No. 4 and No. 5. * A mating connector is supplied with the lens. 75 SWITCH FOR SELECTING AUTO / MANUAL IRIS IRIS GAIN 75 M Z A M F A Connector 95 95 3 4 5 6 YEL GRN SW2 D2 (Unit:mm) TRIMMER FOR ADJUSTING IRIS GAIN 68 SWITCH FOR SELECTING AUTO / MANUAL IRIS, ZOOM, FOCUS TRIMMER FOR ADJUSTING FOCUS 68 73. 5 HOOD Optical Accessories for Remote Control Lenses Auto-Adjustment of Back Focus ●By Additional Features High Speed Focus, Low Noise ●By 1. CLOSE-UP LENS ●A simply pressing a switch located on the front side of the lens drive unit, you will be able to adjust Back Focus automatically and accurately. adopting a Rear Focus System design*, the lens features high speed focusing of 1. 5sec (when controlled by remote manual operation) while at the same time, decreasing the motor noise of the lens. close-up lens is used to shorten the M. O. D. And the maximum object distance becomes the focal length of the close-up lens. There are the following four models of close-up lenses corresponding to the kind of the master lens. MODEL 82CL-UP800H 82CL-UP1300H 105CL-UP900H 105CL-UP800HD CLASS SDTV SDTV SDTV HDTV APPLICABLE LENSES J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7, YH16x7 J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7, YH16x7 J22ex7. 6B HJ22ex7. 6B 82CL-UP800H 82CL-UP1300H 105CL-UP900H 105CL-UP800HD Imaging range for J17ex7. 7B and YJ20x8. 5B with close-up lenses J17ex7. 7B *The Rear Focus System YJ20x8. 5B Tele end : 170mm Wide end : 8. 5mm Tele end : 170mm Wide end : 8. 5mm Optical Performance 816x609 390x293 67x50 26x20 1341x1006 494x371 ●Between WIDE 2. CONVERTER ● Focal TELE-SIDE 3. CONVERTER ● Focal 4. EXTENDER ● In the wide end and the tele end, no matter what distance the object is, the YH16x7 KTS-AF will always maintain high optical performance . Usually, the Focus is adjusted by the Front Lens Unit, however, the focus lens unit of the YH16x7 KTS-AF is located behind the zoom lens unit. By this lens design, the focus lens unit has become much smaller and lighter, and allows for a high performance focus response. length is becomes wider by a factor of 0. 8x that of the original lens with the W80-3B, W80Y-85 and W80-HD. ● F-number of the original lens is not affected. ● The minimum object distance becomes 0. 64 times with the W80-3B, W80Y-85 and W80-HD. MODEL W80-Y85 W80-3B W80-HD ADAPTOR 85-2 98-2 85-2 98-2 APPLICABLE LENSES YJ20x8. 5B, YJ19x9B, YH19x6. 7 J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7 J22ex7. 6B HJ17ex7. 7B HJ22ex7. 6B length shifted to the telephoto side by a factor of 1. 5x. ● F-number of the original lens is not affected. Only the telephoto side of the lens can be used, the picture corners are eclipsed at wide angle. The minimum object distance becomes 2. 25 ● times that of the original lens. MODEL T15-2 T15-HD ADAPTOR 85-2 98-2 85-2 98-2 APPLICABLE LENSES J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7 J22ex7. 6B HJ17ex7. 7B HJ22ex7. 6B case of an extreme telephoto or high magnification shot is required, a 2x extender is available. [. . . ] However, you will not be able to remotely control ON/OFF of the AF function. *By modifying the inter-face of the controller, you will be able to resolve the above mentioned situations. Please refer to P. 4 for the details of the inter-face. TO CAMERA FC-AF1 camera Existing Controller TCR-301F TCR-201F TCR-101F <System Configuration> YH16x7 KTS-AF: REMOTE CONTROL INTERFACE 1 2 3 4 5 6 7 8 9 10 11 12 Focus mode Zoom mode GND Iris Remote/Camera Speed mode Iris cont Position mode Power(DC12V) Signal Common(+5. 0V) Focus control Zoom control Iris mode +V1(+7. 5V) -V1(+2. 5V) Position:+7. 5V Position:+7. 5V Remote:GND Close:+7. 5V Close:+7. 5V Close:+2. 5V Speed:OPEN Speed:OPEN Camera:OPEN Open:+2. 5V Open:+2. 5V Open:+7. 5V AF:+2. 5V *1 *1 When Pin No. 1 is controlled by the AF (+2. 5V) mode, it is necessary that Pin No. [. . . ]