User manual CANON L150

[. . . ] Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. νικά Español Nederlands Dansk Norsk Suomi Svenska Türkçe Latviešu Lietuviškai Eesti Русский Українська Hrvatski Română Česky Magyar Slovenščina Български Polski Slovensky ‫العربية فارسی‬ English Français Italiano Deutsch English Settings for the Machine and Software Installation Next, specify the settings for the machine and install software. 3 Connecting the Power Cord and Turning ON the Power . [. . . ] There are high-temperature and high-voltage components inside the machine which may result in a fire or electrical shock. –▪ Electrical equipment can be hazardous if not used properly. Do not allow children to touch the power cord, cables, internal gears, or electrical parts. –▪ If the machine makes an unusual noise or emits smoke, heat, or an unusual smell, immediately turn off the power switches of the machine and computer and disconnect the interface cable if it is connected. Then, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. continued use can result in a fire or electrical shock. –▪ Do not use flammable sprays near the machine. If flammable substances come into contact with electrical parts inside the machine, this may result in a fire or electrical shock. -- If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. ▪▪ This machine is confi rmed as the class 1 laser product in IEC60825-1:2007. Laser Diode Information -- wavelength: 780-800 nm -- maximum power: 10 mW 3 Maintenance and Inspections WARNING ▪▪ When cleaning the machine, turn off the machine and computer, and unplug the interface cables and power plug. failure to do so can result in a fire or electrical shock. –▪ Unplug the power plug from the AC power outlet periodically and clean the area around the base of the power plug's metal pins and the AC power outlet with a dry cloth to remove all dust and grime. In damp, dusty, or smoky locations, dust can build up around the power plug and become damp, which can cause a short circuit, resulting in a fire. –▪ Clean the machine with a well wrung out cloth dampened with water or mild detergent diluted with water. Do not use alcohol, benzene, paint thinner, or other flammable substances. If flammable substances come into contact with electrical parts inside the machine, this may result in a fire or electrical shock. –▪ Some areas inside the machine are subject to high voltage. When removing jammed paper or when inspecting inside of the machine, be careful not to allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this can result in burns or electrical shock. –▪ Do not dispose of used toner cartridges in open flames. This may cause the toner remaining inside the cartridges to ignite, resulting in burns or fire. –▪ If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation. [. . . ] i tillegg avgis det kjemiske partikler ved utskrift , og det er derfor viktig å sørge for tilstrekkelig ventilasjon. ) ▪▪ et sted nær utstyr som genererer magnetiske eller elektromagnetiske bølger ▪▪ et laboratorium eller sted der det skjer kjemiske reaksjoner ▪▪ et sted som er utsatt for salt i luften, etsende gasser eller giftige gasser ▪▪ et sted, for eksempel på et teppe eller en matte, som kan forskyve seg på grunn av maskinens vekt, eller der maskinen kan synke ned Temperatur- og fuktighetsforhold ▪▪ Temperaturområde: 10 til 30 °C ▪▪ Fuktighetsområde: 20 til 80 % relativ luftfuktighet (uten kondens) VIKTIG Beskytte maskinen mot kondens ▪▪ For å hindre at det dannes kondens inne i maskinen i tilfellene nevnt nedenfor, må du la maskinen tilpasse seg temperaturen og fuktigheten i omgivelsene i minst to timer før den brukes. Denne maskinen er klassifisert under IEC 60825-1: 2007, EN60825-1: 2007 og oppfyller følgende klasser: CLASS 1 LASER PRODUCT LASER KLASSE 1 APPAREIL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LÁSER DE CLASE 1 APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1 FORSIKTIG Bruk av kontroller, justeringer eller gjennomføring av andre prosedyrer enn de som er angitt i håndbøkene for maskinen, kan føre til at du utsettes for skadelig stråling. , som er en ENERGY STAR®-partner, erklærer at dette produktet tilfredsstiller retningslinjene for energisparing som gjelder for ENERGY STAR-programmet. [. . . ]