User manual CANON LBP-2000

[. . . ] Laser Beam Printer User's Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. ENG Canon Laser Beam Printer LBP-2000 User's Guide About the Manuals for the Machine The manuals for this machine are divided as follows. Use this chart to help you find the information you require. Installing and setting up the printer . . . . . . . . . . . . . . . . . . . . . . [. . . ] 148 × 210 mm 210 × 297 mm 7 1/4 ×10 1/2 in. envelope 162 × 229 mm envelope 110 × 220 mm envelope 182 × 257 mm 7-12 PCL MENU ORIENTATION PORTRAIT, LANDSCAPE Sets the direction of printing on the page to Portrait or Landscape. Printing across the width of the page is portrait orientation, and printing across the length of the page is landscape orientation. PORTRAIT Prints from left to right across the width of the page (letter style. ) LANDSCAPE Prints from bottom to top across the length of the page. Landscape orientation is convenient for spreadsheets or other printouts that require increased width for printing. The printer can rotate all fonts to make any of the resident fonts available for either portrait or landscape printing. FORM 5-64-128 This determines the number of lines of text printed on one page. Change this setting only if you have a software application that does not enable you to set the page length, lines per page, or lines per inch. 7 Printing Environment Settings FNTSRC INTERNAL, SOFT, FLASH This (Font Source) setting enables you to set the default for font selection. After you print a font list, you will see the fonts listed as internal fonts, soft fonts, or flash fonts. INTERNAL Selects internal (resident) fonts. SOFT Selects permanent soft fonts. Permanent soft fonts are downloaded to the printer's memory by software applications. These fonts are not erased from memory once a job is completed. They remain in RAM until the printer is turned off. PCL MENU 7-13 FLASH Selects fonts that have been downloaded and stored in the optional Flash ROM module. FONTNUM 0, 1-999 This (Font Number) setting enables you set the default font by its number. The printer assigns a font number to every typeface. Print a PCL Font List to see the numbers assigned to the fonts. The font number (Font #) is the first column in the list. (See "PCL Font List Sample, " on p. 10-7) 0 Courier is selected unless you change the setting. 1-999 To increase the number, press [Value]. You can quickly scroll through the numbers in increments of 10 by holding down [Value]. To decrease the number, press [Shift] and [Value], or press and hold [Shift] and [Value] to scroll backwards quickly in decrements of 10. 7 Printing Environment Settings PT. SIZE 4. 00-12. 00-999. 75 When the selected font is a bitmap or fixed spacing font, this item will not appear for selection. The Point Size setting is the measured vertical height of a typeface. There are 72 points per inch, so a 36-point font is half an inch high, measured from the top of the uppercase letters to the tail of the letter y. 12. 00 The printer font source is set for 12-point. 4. 00 to 999. 75 To increase the number in increments of 0. 25, press Value. To quickly scroll through the numbers in increments of 1. 00, hold down Value. To decrease the number in decrements of 0. 25, press Shift and Value, or press and hold Shift and Value to quickly scroll backwards in decrements of 1. 00. 7-14 PCL MENU PITCH 0. 44-10. 00-99. 99 PITCH appears only if the font source you selected with FNTSRC (font source) and FONTNUM (font number) above is a scalable font in a fixed pitch typeface. Use this item to set the pitch of the font. [. . . ] 7-11 Cleaning Roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 Continuous Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 Operation Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 Print Ethernet Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]