User manual CANON LBP5000

[. . . ] Canon is not liable for errors contained herein or for consequential or incidental damages incurred as a result of acting on information contained in the manual. The information contained herein shall not be reproduced in whole or in part without prior written consent from Canon. Trademarks LBP, Canon, and the Canon Logo are trademarks of Canon Inc. Microsoft®, Windows®, and Windows NT® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or in other countries. Other brand and product names are trademarks or registered trademarks of their respective companies. [. . . ] Before using the CAPT, make sure you select it as your current Windows printer driver. During Setup, the installation program makes the CAPT the default printer driver. If you have not changed printers since running the Setup program, you are ready to print. 66 Using the Canon Advanced Printing Technology Chapter 3 Windows 95/98/Me Printer Properties With the CAPT, you initiate printing as you normally would from a Windows application. From the Print dialog box, usually accessed from an application's File menu, you can select Properties to proceed to the Canon LBP5000 Properties dialog box and its printing options. You can open the Properties dialog box from the Printers folder. The number of tabs displayed in the Properties dialog box depends on how you have your system set up. The way you get to the dialog boxes determines how long the printing options remain in effect: Using the Canon Advanced Printing Technology · If you start from an application's Print. . . command, your choices apply only to that print job. They will not be stored when you close the application. · If you start from the Printers folder, the settings apply to all Windows applications and remain in effect until you change those settings. For more information about the following features, see the online Help. Select the Units of measurement (Centimeters or Inches). Define the Paper Size using the Width (7. 62­21. 59 cm) and Height (12. 70­35. 56 cm) settings. Click OK to accept your changes. If you wish to restore the default settings to all of the custom forms, then click Restore Defaults. Overlay Using the Canon Advanced Printing Technology An overlay allows you to add data you use often, such as a logo, to the print data from an application. For example, when using an overlay you can automatically print your logo on letters you create. Overlay on the Page Setup tab accesses the settings to specify how you want the overlay and print data printed, including the print position, size, and whether it is printed in the foreground (on top of) or background (under) the application data. Chapter 3 Using the Canon Advanced Printing Technology 73 Use Browse. . . to select the file that contains the overlay data. File Name displays the currently selected overlay file name. When you select a file and close the Select File dialog box, the File Name drop-down list and preview are updated. The overlay file must be a Windows bitmap or a Windows metafile. Overlay Placement lets you specify if you want the overlay to appear in back of the application data or in front of the application data (Background, Foreground). Position lets you specify the position of the overlay based on its distance from the paper's left and top edges. Size lets you set the size of the overlay. [. . . ] Resetting or shutting off the computer clears all information from RAM. Printing very complicated documents might require closing other running programs or adding more RAM to the computer. See also Physical RAM, Virtual memory. Resolution The density of dots for any given output device, expressed in terms of dots per inch (dpi). Low resolution causes font characters and graphics to have a jagged appearance, but prints faster than higher resolutions. [. . . ]