User manual CANON LS-555H BROCHURE

[. . . ] • Canon is not responsible for any damages, direct or indirect, arising from or related to the use of this printer. Trademarks • Canon and the Canon logo, Page Composer are registered trademarks or trademarks of Canon Inc. • Microsoft®, Windows®, Windows NT®, and MS-DOS® are registered trademarks of Microsoft Corporation in the United States and/or other countries. • Apple, AppleTalk, EtherTalk, LocalTalk, and Macintosh are trademarks of Apple Computer, Inc. • IBM is a trademark of the IBM Corporation in the United States. [. . . ] However, @ * ; and = cannot be used in the name. 7 When a zone is set on the network, enter the name of the printer's zone. If no zone is set, then leave the asterisk (*) entry as it is. Important z If a zone is set, the zone name must be entered. If the name of a zone where the printer is not located is entered, then the Macintosh computer can no longer recognize the printer. Contact your network system administrator for more details about the zone name. 8 9 Click the OK button. When you return to the Network screen of the Device Manager, click the Reset button. The printer network interface restarts and enables the settings. This completes the printer protocol settings. 3-8 AppleTalk Network Settings (Macintosh) 8 Installing the Printer Driver After completing the printer protocol settings, install the printer driver on every Macintosh that will be used for printing and perform the print destination settings. The printer driver for the printer must be installed for printing. (Æ Setup Guide) Follow the instructions in the Setup Guide to install the printer driver. Selecting the printer in the Chooser completes the printer driver installation for Mac OS 8/9. For Mac OS X, open Print Center and use the Add Printer feature to add the printer and complete the printer driver installation. Installing the Printer Driver 3-9 9 3-10 AppleTalk Network Settings (Macintosh) 10 4 NetWare® Settings (Windows) The chapter describes the setting methods and procedures for connecting the printer to a NetWare® network. 1 Procedures Required for a NetWare® Network Here is a summary of the procedures required to set the printer for use on a NetWare® network. 1 Connect the network cable ÆSetup Guide Follow the instructions in the Setup Guide to connect the network cable. 2 Setting the Printer Frame Type ÆP. 4-3 Set the frame type to select the printer protocol. In NDS queue server mode (NDS PServer), the NDS print server is used to print. In the bindery queue server mode (Bindery PServer), the bindery print server is used to print. In the queue server mode, one NetWare® license is required for every network interface used in the network. 4-6 NetWare® Settings (Windows) 6 • Remote printer mode When the remote printer mode is used, the printer is controlled by the NetWare® print server, so a NetWare® print server is required. An NDS print server is used to print in the NDS remote printer mode (NPrinter), and a bindery print server is used to print in the bindery remote printer mode (RPrinter). Setting Up a NetWare® Print Service 4-7 7 Setting Up a NetWare® Server with NWADMIN and PCONSOLE „ Using NDS Queue Server Mode/Remote Printer Mode 1 2 Log into NetWare® as the System Administrator, or as a user with equivalent access rights, then start NWADMIN. Execute a quick setup.  From the Tools menu select Print Services Quick Setup.  For Print Server name enter the desired name. To use an existing name, click the button on the right, then select the name from the list.  For Name of the printer, enter the desired name.  To use the queue server mode, select Other/Unknown for Type. To use the remote printer mode, select Parallel for Type, click the Communication button, select LPT1 for Port, then select Manual Load for Connection type.  For Name of the print queue, enter the desired name. [. . . ] (Range: 0 to 47 chars. ) Name of the NetWare® file server of the NetWare® print server. (Range: 0 to 47 chars. ) The password required by the print server setting. (0 to 20 chars. ) The time interval between job confirmations. (Range: 1 to 15 sec. ) Blank Blank Blank 5 Description The frame type used by NetWare®. [. . . ]