User manual CANON LV-5200 BROCHURE

[. . . ] If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “TROUBLESHOOTING” section in the end at this manual. If the problem still persists, contact the sales dealer where you purchased the projector or the service center. SAFETY PRECAUTIONS WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. G This projector produces an intensive light from the projection lens. Do not look directly into the lens; it may damage your eyes. [. . . ] Specifications are subject to change without notice. 24 COMPUTER INPUT PC ADJUSTMENT AUTO PC ADJUSTMENT The Auto PC Adjustment function automatically adjusts Fine sync, Total dots, Horizontal and Vertical picture position to conform to your computer. The Auto PC Adjustment function can be operated as follows. Auto PC Adj. 1 2 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the PC ADJUST Menu icon. Press the POINT DOWN button to move the red frame pointer to the AUTO PC Adj. icon and then press the SET button twice. This Auto PC Adjustment can also be executed by pressing the AUTO PC ADJ. button on the Remote Control Unit. PC ADJUST MENU PC ADJUST Menu icon Move the pointer to the AUTO PC Adj. icon and press the SET button. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in the PC SYSTEM Menu (P23). Select the resolution at the display area dialog box. Display area H Adjustment of the horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase the value. Display area V Adjustment of the vertical area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase the value. Full screen Press the POINT LEFT/RIGHT button(s) to turn the Full screen function “On” or “Off. ” Set “On” to resize the image with 4 x 3 aspect ratio to fit the screen. NOTE : Full screen cannot be selected after Display area, Display area H, and Display area V are adjusted. Press the SET button at the Display area icon and the display area dialog box appears. Display area Press the POINT LEFT /RIGHT button(s) to adjust the value. 3 Store To store the adjustment parameters, move the red frame pointer to the Store icon and then press the SET button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store and then press the SET button. Mode free To clear the adjustment parameters previously set, move the red frame pointer to the Mode free icon and then the SET button. Move the red arrow pointer to the Mode that you want to clear and then press the SET button. Reset Reset all adjustment parameters on the adjustment dialog box to the previous figure. [. . . ] 50 ~ 100 Hz Adjustable from 24” to 300” 500 TV lines (S-Video) F 1. 7 ~ 2. 44 lens with f 25. 7 mm ~ 37. 9 mm with motor zoom and focus 3. 6’ ~ 31. 8’ (1. 1 m ~ 9. 7 m) 180 W RCA Type x 3 (Video/Y, Pb/Cb, Pr/Cr) and Mini DIN 4 pin x 1 (S-Video) RCA Type x 2 DVI-I Terminal (Digital/Analog)x 1 (VGA) HDB 15 Terminal(Analog) x 1 (This terminal is switchable. ) Mini Jack (stereo) x 1 Mini DIN 8 pin x 1 USB Series B receptacle x 1 RCA Type x 2 1. 0 W RMS 1 speaker, 1. 18” x 1. 57” (30mm x 40mm) 0˚ to 15. 6˚ AC 100 ~ 120 V (3. 0 A Max. Ampere), 50 / 60 Hz (The U. S. A and Canada) AC 200 ~ 240 V (1. 5 A Max. Ampere), 50 / 60 Hz (Continental Europe) 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) 14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C) Power Source Operating Range Dimensions Net Weight Laser Pointer : : : : : AA, UM3 or R06 Type x 2 16. 4’ (5m) / ±30˚ 2. 2” x 1. 3” x 7. 6” (55mm x 34mm x 192mm) 0. 36 lbs (165 g) (including batteries) Class II Laser (Max. Output : 1mW / Wave length : 650±20nm) Accessories Owner’s Manual AC Power Cord Remote Control Unit and Batteries VGA Cable Control Cable for PS/2 port DVI/VGA Adapter Carrying Bag Lens Cover and Strap for Lens Cover G The specifications are subject to change without notice. [. . . ]