User manual CANON LV-7220

[. . . ] Multimedia Projector LV-7225 LV-7220 LV-5220 Owner's Manual E English Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Wide Zoom Lens This projector is equipped with Wide Zoom Lens which is 1. 6 times the zoom ratio, and it allows you to enjoy 100" screen size in range of 8. 2' (2. 5m) to 13. 1' (4m). Selectable Lamp Mode Brightness of the projection lamp can be selected in the Setting menu. (See page 45. ) Compact Design This projector is designed compact in size and weight. [. . . ] Blackboard(Green) Picture level suitable for the image projected on a blackboard. Custom User preset image in the Image Adjust Menu (p33). The level being selected. 32 Computer Input Image Level Adjustment 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. Press the Point d button to move the red frame pointer to the item that you want to adjust, and then press the SET button. Adjust each level by pressing the Point 7 8 button. Contrast Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the item to be selected and then press the SET button. Press the Point 7 button to decrease contrast and the Point 8 button to increase contrast. (From 0 to 63. ) Brightness Press the Point 7 button to adjust image darker and the Point 8 button to adjust image brighter. (From 0 to 63. ) Selected Image level Color temp. Press the Point 7 button or the Point 8 button for Color temp. (XLow, Low, Mid, or High) White balance (Red) Press the Point 7 button to lighten red tone and the Point 8 button to deepen red tone. (From 0 to 63. ) White balance (Green) Press the Point 7 button to lighten green tone and the Point 8 button to deepen green tone. (From 0 to 63. ) White balance (Blue) Press the Point 7 button to lighten blue tone and the Point 8 button to deepen blue tone. (From 0 to 63. ) Sharpness Store icon Press the SET button at this icon to store the adjustment. Press the Point 7 8 button to adjust value. Computer Input Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15. ) Gamma Press the Point 7 8 button to obtain better balance of contrast. (From 0 to 15. ) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SET button. The message "OK?" will appear. Select [Yes] to store manual adjustment. To set this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p32). Quit Closes the Image Adjust Menu. "OK?" message Move the pointer to [Yes] and then press the SET button. 33 Computer Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. [. . . ] COMPONENT-VGA Cable SCART - VGA Cable : LV-CA32 : LV-CA31 (Not available in the U. S. A) (This cable is used for RGB 21-Pin Video output of video equipment. ) Multi Card Imager Box Compact Flash Card Wired LAN Card Wireless LAN Card CEILING HANGER : LV-MI01 : LV-WN03 : LV-WN01 : LV-WN02 : LV-CL08 When using the Wired or Wireless LAN Card, set the following name in the PJ Controller operation. Model Name: 08-4-2 61 Appendix Configurations of Terminals RGB INPUT/COMPONENT INPUT/RGB OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 10 15 14 4 9 3 8 13 2 7 12 1 6 11 1 2 3 4 5 6 7 8 Red (R/Cr) Input / Output Green (G/Y) Input / Output Blue (B/Cb) Input / Output ----Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 ----Ground (Vert. sync. ) Ground / --------Horiz. Input/Output (Composite H/V sync. ) Vert. ----- DVI-I TERMINAL (DIGITAL/ANALOG) Terminal : DVI-I C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 C1 C2 C3 C4 C5 1 2 3 4 5 6 7 8 Analog Red Input Analog Green Input Analog Blue Input Analog Horiz. Data2 Shield No Connect No Connect DDC Clock DDC Data Analog Vert. [. . . ]