User manual CANON LV-7297S BROCHURE

[. . . ] Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes for Notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Functional Execution Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Image Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Acceptable Unacceptable "000" [CR] "Error Code" [CR] Details Response 8. 4. 10. CF_FILM Command Command %1 "CF_FILM_%1" [CR] "ON" --------------- Film Mode ON "OFF" -------------- Film Mode OFF Set / Cancel for Film Mode. The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Acceptable Unacceptable "000" [CR] "Error Code" [CR] Details Response 8. 4. 11. CF_IMAGE Command "CF_IMAGE_%1" [CR] "STAND" -------------------"REAL" ---------------------"CINEMA" -----------------"BLACKBOARD" --------"CUSTOM1" --------------Standard mode High contrast mode Cinema mode Blackboard (Green) mode Custom mode %1 Details Select Image mode. (When it is in usual Power On state, this is valid) Parameter "CUSTOM1" is the same as selecting "Custom" on OSD menu The value set by this Command is stored in EEEPROM, when AC Power Off the Projector the value will be valid. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Acceptable Unacceptable "000" [CR] "101" [CR] ---- Input is Video %1 Details Response Expand Serial Command Functional Specification Page 16 of 41 8. 5. 5. CF_V-POS Command Command "CF_V-POS_%1" [CR] "0000 ­ nnnn" ----------- Directly set Vertical Position setting value "nnnn" is maximum value. This is current Total Line value - Display Line value. "UP" ---------------------- Vertical Position setting value +1 "DN" -------------------- Vertical Position setting value ­1 Set Vertical Position PC signal. (When it is in usual Power On state, this is valid) The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Acceptable Unacceptable "000" [CR] "101" [CR] ---- Input is Video %1 Details Response 8. 5. 6. CF_DDOTS Command Command "CF_DDOTS_%1" [CR] "0100 ­ nnnn" --------- Directly set Display Dots setting value "nnnn" is maximum value. This is current Total Dots value ­ Horizontal Position value. "UP" ---------------------- Display Dots setting value +1 "DN" ---------------------- Display Dots setting value ­1 Set Display Dots PC signal. [. . . ] CR_AUTOSETUP Command Command %1 Details "CR_AUTOSETUP_%1" [CR] "KEYSTONE" --------- Specify Auto Keystone "PCADJ" ---------------- Specify Auto PC Adj. Get Auto Setup setting status Acceptable "000_%a" [CR] When Keystone "AUTO" ----------"MANUAL" -----"OFF" ------------When Auto PC Adj. "ON" -----------" O F F " - - - - - - -- - - "?" [CR] Auto setting Manual setting Off setting On setting Off setting Response %a Unacceptable 9. 11. 15. CR_FANMODE Command Command Details "CR_FANMODE" [CR] Get selected Fan mode. [. . . ]