User manual CANON LV-S3

[. . . ] Multimedia Projector LV-S3 Owner's Manual E English To the Owner Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Press Point 7 8 buttons to decrease/increase value to match the resolution of image. Display area V Adjustment of vertical area displayed with this projector. Press Point 7 8 buttons to decrease / increase value to match the resolution of image. Full screen Press Point 7 8 buttons to switch Full screen function to "On" or "Off. " Set "On" to resize the image with 4 x 3 aspect ratio to fit the screen. Note : Display area, Display area (H/V) and Full screen cannot be adjusted when "480p", "575p", "480i", "575i", "720i (HDTV)" , "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (  P23 ). Press SET button at Display area icon to show the Display area dialog box. Display area To clear adjustment data Reset Reset all adjust parameters on adjustment dialog box to previous figure. Mode free To clear adjustment parameters previously set, move the red frame pointer to Mode free icon and then SET button. Move the red arrow pointer to the Mode that you want to clear and then press SET button. Store To store adjustment parameters, move the red frame pointer to Store icon and then press SET button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store to and then press SET button. Quit Closes PC Adjust Menu. Close this dialog box. To store adjustment data This Mode has parameters being stored. Vacant Mode Shows values of "Total dots, " "Horizontal, " "Vertical, " "Display area H, " and "Display area V. " 26 Computer Input Image Level Selection Direct Operation Select image level among Standard, High contrast and Custom by pressing IMAGE button on the remote control unit. IMAGE button Standard High contrast Custom High contrast Picture adjustment improved in reproduction of the halftones. This adjustment is suitable for providing a better image in a brighter place. Custom User preset image in the Image Adjust Menu (p28). Standard Normal picture adjustment preset on this projector. Menu Operation Image Select Menu icon 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Image Select Menu icon. Press the Point Down button to move the red frame pointer to the level that you want to set and then press the SET button. Standard IMAGE SELECT MENU Move the red frame pointer to the level and press SET button. Normal picture level preset on this projector. High contrast Picture adjustment improved in reproduction of the halftones. This adjustment is suitable for providing a better image in a brighter place. Custom User preset image in the Image Adjust Menu (p30). The level being selected. 27 Computer Input Image Level Adjustment 1 2 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to Image Adjust Menu icon. Press Point d button to move the red frame pointer to the item that you want to adjust. Adjust each level by pressing Point 7 8 buttons. Image Adjust Menu icon IMAGE ADJUST MENU Move the red frame pointer to the item to be selected and then press SET button. Contrast Press Point 7 8 buttons to adjust the image contrast. [. . . ] 50 ~ 100 Hz Adjustable from 34" to 200" F 1. 6 ~ 1. 8 lens with f 18. 3 mm ~ 21. 9 mm with manual zoom and focus 4. 3' ~ 21. 2' (1. 3 m ~ 6. 5 m) 160 W RCA Type x 1 (Video) and Mini DIN 4 pin x 1 (S-Video) Mini Jack (stereo) x 1 (VGA) HDB 15 Terminal x 1 Mini Jack (stereo) x 1 Mini DIN 8 pin x 1 USB Series B receptacle x 1 0. 8 W RMS 1 speaker, ø1. 1" (28mm) 0° to 8. 0° AC 100 ~ 120 V (2. 4 A Max. Ampere), 50 / 60 Hz (The U. S. A and Canada) AC 200 ~ 240 V (1. 2 A Max. Ampere), 50 / 60 Hz (Continental Europe) 41 °F ­ 95 °F (5 °C ­ 35 °C) 14 °F ­ 140 °F (-10 °C ­ 60 °C) Power Source Operating Range Dimensions Net Weight : : : : AAA, SUM-04 or R03 type x 2 16. 4' (5m) / ±30° 2. 0"(W) x 0. 91"(H) x 4. 8"(D) (51. 5mm x 23. 2mm x 123mm) 2. 11oz (60 g) (including battery) Accessories Owner's Manual AC Power Cord Remote Control Unit and Battery Presentation Remote Control Unit and Battery Presentation Remote Receiver VGA Cable Carrying Bag Lens Cover String for Lens Cover ­ The specifications are subject to change without notice. ­ LCD panels are manufactured to the highest possible standards. [. . . ]