User manual CANON LV-X2

[. . . ] Multimedia Projector LV-X2 Owner's Manual E English TO THE OWNER Before operating this projector, read this manual thoroughly to operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be operated when "RGB" is selected on PC SYSTEM Menu (P22). 1 2 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame to PC ADJUST Menu icon. Press the POINT DOWN button to move the red frame to the item that you want to adjust and then press the SET button. Press the POINT LEFT/RIGHT button to adjust value. Fine sync PC ADJUST MENU PC ADJUST Menu icon Move the red frame to the item and press the SET button. Adjusts an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value. (From 0 to 31. ) Total dots The number of total horizontal dots in your picture. Press the POINT LEFT/RIGHT button(s) and adjust number to match your PC image. Horizontal Adjusts the horizontal picture position. LEFT/RIGHT button(s) to adjust the position. Vertical Adjusts the vertical picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position. Current mode Press the SET button to show the information of the computer selected. When the image has a dark bar(s), try this adjustment. Current mode Press the SET button at this icon to adjust "Clamp, " "Display area (H/V)" or set "Full screen. " Shows status (Stored / Free) of the Selected Mode selected Mode. Press the POINT Press the POINT LEFT/RIGHT button to adjust the value. Press the SET button at the Current mode icon to show the information of the computer connected. 25 COMPUTER INPUT Display area Selects the area displayed with this projector. Select the resolution at the Display area dialog box. Display area H Adjustment of horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase value to match the resolution of image. Display area V Adjustment of vertical area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase value to match the resolution of image. Full screen Press the POINT LEFT/RIGHT button(s) to switch Full screen function to "On" or "Off. " Set "On" to resize the image with 4 x 3 aspect ratio to fit the screen. NOTE : Display area (H/V) and Full screen cannot be adjusted when "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P22). [. . . ] G Wireless Remote Control Unit G Control Cable for PS/2Port G Control Cable for Serial Port Type No. : LV-CA25 Type No. : LV-CA26 G Control Cable for ADB Port G MAC Adapter G Ceiling Mount Hanger Type No. : LV-CA27 Type No. : LV-AD02 Type No. : LV-CL06 42 APPENDIX CONFIGURATIONS OF THE TERMINALS COMPUTER INPUT TERMINAL (ANALOG) Terminal : HDB15-PIN Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, MAC Adapter (not supplied) is required. Pin Configuration 5 10 15 14 4 9 3 8 13 2 7 12 1 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input Sense 2 Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 No Connect Ground (Vert. sync. ) Sense 0 Sense 1 Horiz. [. . . ]