User manual CANON MICROFILM SCANNER 800II DRIVER

[. . . ] Introduction Introduction Thank you for purchasing the Microfilm Scanner 800II. These Instructions describe how to use the ISIS/TWAIN driver software that makes it possible for you to use ISIS-compatible or TWAIN-compatible Windows applications with your Microfilm Scanner 800II. To ensure that you fully understand the functions provided by this driver and make the best possible use of those functions, read these Instructions in conjunction with the Microfilm Scanner 800II Instructions. The “Scanning Utility 800” scanning utility supplied with this package uses its own dedicated scanner driver and does not require the ISIS/TWAIN driver. 1 Conventions Conventions This manual uses the following symbols and icons. IMPORTANT Indicates important information on items that must be observed or that are prohibited as part of scanner operation. [. . . ] Press this key again or any other key to cancel Standby mode. [Addon] Specifies whether text, counters, or information such as the date or time are imprinted on the scanned image. [Erase Background] When the Mode is set to [Black and White] and the Dither setting is [None] or [Fine], pressing this key automatically erases speckling in the background of text, line drawings, etc. [Adjust Margin] This function adjusts the margin size during scanning. When you press this key, the display shows the margin size. The margin can be adjusted to a value between –10 mm and 10 mm either side of 0. [Adjust Sharpness] Selects the level of sharpness (edge enhancement) during scanning. When you press this key, the display shows the level of sharpness. [New File] If you press this key when separators (§ P. 22) are enabled in Detail Settings, the scanned image is saved to a separate file (folder) after the key is pressed. [Lighten Screen] Lightens the screen [Darken Screen] Darkens the screen [Margin Scanning] Specifies whether margins are scanned when an image is scanned. [Skew Correction] Corrects skewed images during scanning so that images are scanned straight. [Auto Center Image] In Reader/Printer mode, this function prints the scanned image in the center of the page. [Overlay] When you press this key, the 2 images in the A and B positions on duplex film are scanned for output as a single image with one image positioned above the other. 2 Using the ISIS driver 33 Chapter 2 Using the ISIS driver [Save Settings] Stores the specified front panel status and scanning parameter settings in a function key. NOTE When you select [Save Settings], the message shown below appears. Clicking [OK] enables the [Save Settings] button. Clicking [Cancel] returns all the settings to the values set before [Save Settings] was selected. Check the function key settings before clicking the button. To assign the [Save Settings] function to a function key, set the scanning parameters and then open the “Function Keys” dialog box and select [Save Settings] for the key to which the scanner settings are to be assigned. If you have already assigned the [Save Settings] function, click the [Save Settings] button to store the settings. Please note that if [Save Settings] has been registered in the function key from the ISIS/TWAIN driver, then the registration of [Allocation of all scanner settings] (Microfilm Scanner 800II Instructions, page 38, “Function Keys”) in the function key by the scanner main unit will become ineffective. [600 DPI] Toggles the scanning resolution between 300 and 600 dpi. When this key is set to ON, the resolution 600 dpi. When it is switched from ON to OFF, the resolution changes to 300 dpi. 3 Press the [OK] button to store the functions assigned to the function keys.   34 Chapter 2 Using the ISIS driver Image Address Settings The “Image Address” dialog box sets the film address and is only valid when the FS Controller III is used. 2 Using the ISIS driver <Image Address> [Batch Number] Tick this checkbox and type in a search number as the batch number. If you do not tick the checkbox and enter a search number, “0” is set. [. . . ] Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Film Image Options . . . . . . . . . . . . . . . . . . . . . . . 18 19 20 18 G Gamma Curve Settings . . . . . . . . . . . . . . . . . . . . . . . . . 30 W Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 I Image Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]