User manual CANON PIXMA MP140

[. . . ] The machine willinitialize. WaituntilthePOWERlampstopsflashingand remains lit green. b Remove the Protective Tape gently. Protective Tape e Repeat the procedure for the Color FINE Cartridge, inserting it into the right slot C . C Electrical Contacts b the Scanning Unit (Printer Cover), then remove the Lift Protective Material on the right side. f the Scanning Unit (Printer Cover) and pull the Scanning Lift Unit Support down into place. The FINE Cartridge Holder automatically moves to the left. PrintHeadNozzles The FINE Cartridge Holder moves to the left. [. . . ] b Turn the computer on and start Windows. Important If you see the Found New Hardware Wizard, remove the USB cable. Then proceed from step c to install the MP Drivers. a Connect one end of the USB cable to the computer, the other to the machine. Note Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- g on the front page. i When the Installation completed successfully screen h When the Print Head Alignment Recommended screen appears, click Next. appears, click Restart. The system is restarted automatically. c Insert the Setup CD-ROM. The setup program should run automatically. Note The setup program should run automatically. If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon . i When the User Registration screen appears, click Register. b Turn on your Mac and your machine and insert the Setup CDROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. When using Mac OS X v. 10. 2. 8 to v. 10. 3. 3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. j After restarting the computer, start Printer Setup Utility d When the main menu appears, click Easy Install. c Double-click the Setup icon. d When the Authenticate screen appears, enter your Note · Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. · We would appreciate it if you would take part in the PIXMA Extended Survey Program regarding the use of Canon machine. For details, refer to the on-screen instructions. (start Print Center if you are using Mac OS X v. 10. 2. 8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the machine. For more detailed instructions, refer to the Mac on-screen Help. Note If the straight line is misaligned or print quality is not satisfactory after installing the MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head" in the Quick Start Guide. administrator name and password. [. . . ] "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. [. . . ]