User manual CANON MV650I

[. . . ] 0_D73PAL_E(cover) 02. 12. 26 9:17 PM Page 1 PUB. DIE-181 Digital Video Camcorder Instruction Manual English Introduction Mastering the Basics Using the Full Range of Features Editing MV650i MV630i Mini Digital Video Cassette Using a Memory Card This instruction manual covers the MV650i, MV630i, MV600i and MV600. Please note that illustrations and explanation in this manual are based on the MV650i. Additional Information PAL 1_D73PAL_E(02-12) 02. 12. 26 9:20 PM Page 2 Important Usage Instructions E WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] When connecting a VCR: Make sure that "H" is not displayed on the screen. If "H" is displayed, change the setting ( 37). The quality of the edited tape will be slightly lower than that of the original. When connecting a digital video device: You can connect only one device to the camcorder with the DV cable. Blank sections may be recorded as anomalous picture. If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. Example: Recording to a VCR CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA 1. Connect the camcorder to the VCR. See Playing Back on a TV Screen ( 39). 2. Set the camcorder to PLAY (VCR) mode and load a recorded cassette. Connected device: Load a blank cassette and set the device to record pause mode. Editing 4. Locate the scene you wish to copy and pause playback shortly before the scene. Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete. Stop playback. 86 4_D73PAL_E(86-98) 02. 12. 26 9:28 PM Page 87 Connecting a Digital Video Device Refer also to the instruction manual of the digital video device. E Side with an arrow Signal flow 4 pin ­ 4 pin: CV-150F DV Cable (optional) 4 pin ­ 6 pin: CV-250F DV Cable (optional) Editing 87 4_D73PAL_E(86-98) 02. 12. 26 9:28 PM Page 88 MV650i MV630i MV600i Recording from Analog Video Devices (VCR, TV or Camcorder) E You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder. Anomalous signals sent from the connected device may be recorded as anomalous picture (although it may not appear so on the screen), or it may not be recorded at all. You cannot record from tapes with copyright protective signals. Headphones cannot be used during analog line-in recording. If the AV/headphones terminal set to [PHONES H], it will automatically switch to [AV]. When connecting to a TV/video with SCART terminal, use a SCART adapter with input capability (commercially available). The SCART Adapter PC-A10 is for output only. CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen ( 39). 2. Set the camcorder to PLAY (VCR) mode and load a blank cassette. Connected device: Load the recorded cassette. [. . . ] The figures in brackets represent the maximum length of one movie clip. Estimated SD Memory Card 1024 x 768: Superfine: 14 images/Fine: 20 images/Normal 39 images; SDC-8M capacities*1: 640 x 480: Superfine: 35 images/Fine 52 images/Normal 86 images The actual number varies according to the images. Sample images recorded on the supplied SD Memory Card are to be included in the total number. Design rule for Camera File system (DCF), Exif 2. 2 compliant, File format*1: Digital Print Order Format (DPOF) compliant (still images only) This camcorder supports Exif 2. 2 (also called "Exif Print"). [. . . ]