User manual CANON MV6I MC

[. . . ] PUB. DIE-190 E Introduction Editing Mastering the Basics Using the Full Range of Features Using a Memory Card Additional Information Digital Video Camcorder Instruction Manual Mini Digital Video Cassette PAL Important Usage Instructions WARNING: E WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Introduction TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE. [. . . ] · When connecting to a TV/video with SCART terminal, use a SCART adapter with input capability (commercially available). The SCART Adapter PC-A10 is for output only. : Signal flow S-150 S-Video Cable OUTPUT S(S1)-VIDEO E Editing VIDEO STV-250N Stereo Video Cable AUDIO L R Side with arrow CV-150F DV Cable (optional) Above illustration shows the connection using a S-video cable. You can also connect to the VIDEO terminal instead ( 35). 91 E Turning the analog-digital converter on CAMERA PLAY (VCR) CARD CAMERA CARD PLAY (VCR) VCR. SET UP ( 39) AV DV OUT···OFF To turn the analog-digital converter on, open the menu and select VCR SET UP. Then select AV \ DV OUT, set it to ON and close the menu. Cautions: · For normal use, set AV \ DV OUT to OFF through the menu. If it is set to ON, you cannot input digital signals through the camcorder's DV terminal. · When connecting to a PC equipped with a DV terminal, you may not be able to transfer converted signals to your PC, depending on the software you are using, and the specifications of your PC and its settings. 92 Editing Recording Over Existing Scenes (AV Insert Editing) You can insert and replace images/audio on the tape of the camcorder with images/audio from other video devices connected via AV terminal or DV terminal. Original video and audio will be replaced with the new video and audio. E The playback tape Before inserting The tape in the camcorder After inserting The tape in the camcorder Editing : Signal flow OUTPUT S-150 S-video Cable S(S1)-VIDEO VIDEO STV-250N Stereo Video Cable AUDIO L R ZERO SET SEARCH MEMORY SELECT AUDIO DUB. AV INSERT REW ­/ PLAY STOP SLOW FF +/ ¥2 REMOTE SET PAUSE Side with arrow CV-150F DV Cable (optional) 93 E Preparations The tape in the MV6i MC: When using the MV6i MC's AV insert function, only record to tapes recorded in SP mode. If there are non-recorded portions or portions recorded in LP mode on the tape, recording will stop. The playback tape: Use only tapes without non-recorded portions. If there are non-recorded portions or changes in the recording mode, you may not be able to insert AV correctly. You cannot insert AV in the following cases: · The playback tape has been poorly recorded. · During special playback: fast forward playback, rewind playback or slow playback etc. (analog only). TV: You cannot insert AV from a TV program with anomalous synchronized signals, such as when the program itself received poor signals. Editing Example recording from a VCR 1. Prepare the VCR and TV. · Set the TV/Video selector on the television to Video. For further details, see "Connections for Playback on a TV Screen" on p. · Turn on the VCR and load a recorded cassette. · See TV and VCR instruction manuals for details. 3. Turn the camcorder's POWER switch to PLAY (VCR) and load a recorded cassette. · Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position). 4. Move the camcorder's TAPE/CARD switch to TAPE. 94 Editing 1. On the VCR, locate a point 3 seconds before the scene to be inserted. On the camcorder, press PLAY and locate the recording start point. Set the camcorder to playback pause mode. · You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playback mode. E 3. [. . . ] Turn off the printer and turn it back on. If the error persists, consult the nearest Canon customer support center listed in the Bubble Jet Quick Start Guide. 166 Specifications MV6i MC Power Supply (rated): 7. 4 V DC Power Consumption (while recording with the AF turned on): 3. 1 W (Using viewfinder), 4. 1 W (Using LCD screen) Television system: CCIR standard (625 lines, 50 fields) PAL colour signal Video recording system: 2 rotary heads, helical scanning DV system (Consumer digital VCR SD system) Digital component recording Audio recording system: Tape: PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch) Card: ADPCM digital sound: 16 bit (16 kHz/1 ch), 4 bit Image sensor: 1/6" CCD (charge coupled device), approx. 800, 000 pixels (card: 740, 000 effective pixels, tape: 420, 000 effective pixels) Tape format: Videocassettes bearing the D mark. Tape speed: SP: 18. 83 mm/s, LP: 12. 57 mm/s Maximum recording time (with an 80 min. [. . . ]