User manual CANON MV800

[. . . ] PUB. DIE-217 English English Digital Video Camcorder Instruction Manual Introduction Basic Functions Advanced Functions Editing Mini Digital Video Cassette Additional Information PAL Important Usage Instructions Introduction WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE. [. . . ] Open the menu and select [D. EFFECT SETUP]. Select [D. E. SELECT] and set it to [MULTI-S]. Select [M. S. SPEED] and select the transition speed. Following transition speeds can be selected: fast (every 4 frames), moderate (every 6 frames*), slow (every 8 frames*). * In Low Light mode: moderate (every 8 frames), slow (every 12 frames). 4. Select [M. S. SPLIT], select the number of sequences and close the menu. "MULTI-S" flashes. 5. Press the DIGITAL EFFECTS ON/OFF button. · MANUAL: Images will be captured each time you press the DIGITAL EFFECTS ON/OFF button. The blue frame indicating the next sequence disappears after the last image. Pressing the DIGITAL EFFECTS ON/OFF button for more than 1 second cancels the images one after another. · FAST, MODERATE, SLOW: The set number of images will be captured at the set speed. To cancel the multi-image screen, press the DIGITAL EFFECTS ON/OFF button. Advanced Functions Recording 6. Press the start/stop button to begin recording. The multi-image screen is recorded on the tape. Turn off the digital effect when you do not use it. The camcorder retains the setting even if you turn it off or change the program AE mode. The image quality may be slightly lower with digital effects. Digital effects cannot be used in the following cases: - When the program selector is set to EASY. About the multi-image screen: The multi-image screen cannot be used in the following cases: - In the Night mode. In PLAY (VCR) mode: Pressing any tape operation button (such as play or pause) cancels the multi-image screen. 57 Widescreen TV Recording (16:9) The camcorder uses the full width of the CCD providing high-resolution 16:9 recording. WIDESCREEN button CAMERA PLAY (VCR) Press the WIDESCREEN button. ·" " appears. · The LCD screen switches to the "letterbox" display. The picture on the viewfinder appears horizontally squeezed. The multi-image screen cannot be used when the widescreen mode is selected. If you play back a widescreen recording on a normal TV, the image appears horizontally squeezed. 58 Magnifying the Image Playback The playback image can be magnified up to 5 times. E Zoom lever SET dial CAMERA PLAY (VCR) 1. Move the zoom lever toward T. · The image is magnified by 2 times. [. . . ] This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. Battery Packs When you need extra battery packs, select from the following: NB-2L, NB-2LH, BP-2L12, BP-2L14. CB-2LTE Battery Charger Use the battery charger for charging the battery packs. Battery Pack NB-2LH NB-2L BP-2L12 BP-2L14 Charging Time 90 min. 170 min. Charging time varies according to the charging condition. CBC-NB2 Car Battery Charger Use the car battery charger to charge battery packs on the move. [. . . ]