User manual CANON MVX100I

[. . . ] PUB. DIE-186 Digital Video Camcorder Instruction Manual English Introduction Mastering the Basics Using the Full Range of Features Editing Mini Digital Video Cassette Using a Memory Card This instruction manual covers the MVX150i and MVX100i. Please note that illustrations and explanation in this manual are based on the MVX150i. Additional Information PAL 0_D74PAL_E(cover) 03. 2. 24 2:47 PM Page 2 Important Usage Instructions E WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] Set the camcorder to PLAY (VCR) mode and load a blank cassette. Connected device: Load the recorded cassette. Press the REC PAUSE button. In record pause mode and during recording, you can check the picture on the screen. Editing 5. Press the e/a button when the scene you wish to record appears. 7. Press the 3 button to stop recording. · Press the e/ a button to pause recording. · Press the e/ a button again to restart recording. 8. Connected device: Stop playback. 89 4_D74PAL_E(87-99) 03. 2. 11 5:44 PM Page 90 Recording from Digital Video Devices (DV Dubbing) E You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality. When recording from digital video devices, make sure that "AV \ DV" is not displayed on the screen. If "AV \ DV" is displayed, change the setting ( 93). Anomalous signals sent from the connected device may be recorded as anomalous picture (although it may not appear so on the screen), or it may not be recorded at all. Copyright protected signals cannot be recorded. Blank sections may be recorded as anomalous picture. If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. You can connect only one device with the DV cable. You can use the camcorder for playback and recording without reconnecting the DV cable. CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA 1. Connect the camcorder to the digital video device. See Connecting a Digital Video Device ( Editing 88). 2. Set the camcorder to PLAY (VCR) mode and load a blank cassette. "DV IN" appears. 3. Connected device: Load the recorded cassette. Press the REC PAUSE button. In record pause mode and during recording, you can check the picture on the screen. 5. Press the e/a button when the scene you wish to record appears. 7. Press the 3 button to stop recording. · Press the e/ a button to pause recording. · Press the e/ a button again to restart recording. 8. [. . . ] The figures in brackets represent the maximum length of one movie clip. Estimated SD Memory Card 1280 × 960: Superfine: 6 images/Fine: 10 images/Normal 18 images; SDC-8M capacities: 640 × 480: Superfine: 34 images/Fine 50 images/Normal 84 images The actual number varies according to the images. Sample images recorded on the supplied SD Memory Card are to be included in the total number. File format: Design rule for Camera File system (DCF), Exif 2. 2 compliant, Digital Print Order Format (DPOF) compliant (still images only) This camcorder supports Exif 2. 2 (also called "Exif Print"). [. . . ]