User manual CANON MX492

[. . . ] Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete. 3 Preparing to Connect the Multifunction To the Network Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. [. . . ] If such a warning message appears, set the security software to always allow access. 5 Installing the Drivers & Software When you reinstall your printer on your network because of a router or network change, you follow the same procedure as for a first time install. A step-by-step walk through of the wireless setup is built into the installation routine of the software for your PIXMA. To begin setup of your PIXMA MX492 on your wireless network, you must first download the software to your computer. Access the MX490 series Setup page, read the instructions, then click the Download button. After the file has downloaded successfully (default location is the Downloads folder), double-click it to start the install procedure. The setup instructions presented in this document describe the “Cableless Setup” method which does not require the need to know the SSID (network name), or network passphrase and does not require the printer to be temporarily connected to the computer with a USB cable. 6 Installing the Drivers & Software Click Start Setup Again if the following screen appears. 7 Installing the Drivers & Software Click Next if the following screen appears. 8 Connecting to the Network On the following screen, select Wireless LAN Connection, then click Next. 9 Connecting to the Network On the following screen, select Access Point Connection, then click Next. 10 Connecting to the Network Continue following on-screen instructions. On the Printers on Network List screen, check the Setting printer could not be found on the list checkbox and click Next. 11 Connecting to the Network Carefully follow the instructions on the Printer Setup screens 1-1 and 1-2 to select Wireless LAN setup on your machine. 12 Connecting to the Network Continue to follow on-screen instructions. On the Setup Procedure Selection screen, if your printer’s display looks like the example on the left (above Push Button Method), press the machine’s Stop button, then click Other Methods on the Setup Procedure Selection screen (2-1). If the printer’s display already is like the example on the right , click Other Methods. 13 Connecting to the Network Continue to follow on-screen instructions. [. . . ] 20 Adding the Printer Select the Canon MX490 series with Canon IJ Network listed in the Kind column, then click Add. 21 Adding the Printer Click Next on the Add Printer screen 22 Completing the Setup Continue following on-screen instructions. when the Setup Complete screen appears , click Next. [. . . ]