User manual CANON NETSPOT ACCOUNTANT BROCHURE

[. . . ] vi Keys and Buttons Used in This Manual . viii Abbreviations Used in This Manual . x Chapter 1 Before You Start System Requirements . When the NetWare Server is on the Network . [. . . ] For details on the SSL encrypted communication function and the procedure for registering the default key, see "Remote UI Guide" (PDF manual). 3-62 Configuring a Computer that Performs Printing 8 Click [Have Disk], then specify the folder that contains the printer driver from the CD-ROM drive. 3 9 If you are using the IPP Authentication function (See "Protocol Settings for the Printer, " on p. 3-11) and asked to enter the password, enter the user name and password, and then click [OK]. 10 Complete the installation by following the instructions on the screen. IMPORTANT If you want to use Canon LPR2, you need to install it previously. When installing Canon LPR2*, select [Canon LPR 2. 0] from [Available port types]. For more details, see "Canon LPR2* User's Guide" (PDF manual) in the CD-ROM supplied with the software. * Canon LPR2 can be used only with LBP5960/5360/3460/3360. The installation of the printer driver and the port settings are completed. For Windows Vista 1 Confirm the setting for [Receive/Print Range Setting]. Check whether the IP address of the computer for installing the printer driver is permitted to perform printing when [Enable Reject Address] or [Enable Permit Address] is specified. (See "Restricting the Users Who Can Print or Perform the Printer Settings Using IP Addresses, " on p. 3-83) Configuring a Computer that Performs Printing 3-63 Using the Printer on a TCP/IP Network (Windows/UNIX) IMPORTANT · You cannot install the printer driver using an IP address restricted to perform printing in [Enable Reject Address] or [Enable Permit Address] under [Receive/ Print Range Setting]. · If the IP address of the computer on which the printer driver is installed is restricted to perform printing in [Enable Reject Address] or [Enable Permit Address] under [Receive/Print Range Setting], you cannot print from the computer. 2 3 Using the Printer on a TCP/IP Network (Windows/UNIX) From the [Start] menu, select [Control Panel], and then click [Printer] to display the [Printers] folder. Click [Add a network, wireless or Bluetooth printer]. 3 4 3-64 Configuring a Computer that Performs Printing 5 Click [The printer that I want isn't listed]. 3 6 Select [Select a shared printer by name], enter the following URL, and then click [Next]. http://<the IP address or name of the printer>/ipp When you want to perform IPP printing using SSL encrypted communication, enter "https://<the IP address or name of the printer>/". IMPORTANT · You can use IPPS only when [SSL] for IPP printing in [Change TCP/IP Settings] is set to [On]. For details on the procedure for setting IPP, see "Protocol Settings for the Printer, " on p. · Even if a key and its certificate have been created, you cannot set [SSL] for IPP printing to [On] when the key is not registered as the default key. For details on the SSL encrypted communication function and the procedure for registering the default key, see "Remote UI Guide" (PDF manual). Configuring a Computer that Performs Printing 3-65 Using the Printer on a TCP/IP Network (Windows/UNIX) 7 Click [Have Disk], then specify the folder that contains the printer driver from the CD-ROM drive. 3 Using the Printer on a TCP/IP Network (Windows/UNIX) 8 If you are using the IPP Authentication function "Protocol Settings for the Printer" (See p. If the FTP print user name has not been specified yet, do not enter the user name, but press the [ENTER] key on your keyboard. NOTE You cannot perform an anonymous login. 4 Enter the password, then press the [ENTER] key on your keyboard. When managing the printer, and if a password is specified for the printer, enter the administrator password for the printer. If the password has not been specified yet, do not enter the password, but press the [ENTER] key on your keyboard. When printing a file from the printer, enter the FTP print password if you have specified [FTP Print Password]. If the FTP print password has not been specified yet, do not enter the password, but press the [ENTER] key on your keyboard. Printer Management 3-69 5 Enter the following command, then press the [ENTER] key on your keyboard. cd (a space) config When printing a file from the printer, enter "put (a space) the name of the file to be printed", and then press the [ENTER] key on your keyboard. After the printing is completed, proceed to Step 10. IMPORTANT When printing a file, print in the binary mode. 3 Using the Printer on a TCP/IP Network (Windows/UNIX) 6 Enter the following command, then press the [ENTER] key on your keyboard. get (a space) CONFIG (a space) <the file name> The "config" file is downloaded. The letters entered for <the file name> become the name of the downloaded "config" file. IMPORTANT The download directory for the "config" file varies depending on the operating system or settings. If you cannot find the "config" file, browse the "config" file using the file browse function of the operating system. 7 8 Using Notepad, etc. , edit the downloaded "config" file. For details on descriptions of each option, see "Network Setting Items, " on p. 8-12. Enter the following command, then press the [ENTER] key on your keyboard. put (a space) <the file name> (a space) CONFIG NOTE In <the file name>, enter the name of the "config" file that was entered when the file was downloaded. 9 Enter the following command, then press the [ENTER] key on your keyboard to reset the network board. get (a space) reset After completing the reset of the network board, the settings are effective. [. . . ] 3] (SNMP_V3_ENB) ON/OFF ON ON/OFF RW/RO ([Read/Write]/[Read Only]) Up to 32 characters ON RW ([Read/ Write]) public - O - O 8 Appendix 8-23 - O ON/OFF RW/RO ([Read/Write]/[Read Only]) Up to 32 characters OFF RW ([Read/ Write]) public2 - O - O - O ON/OFF OFF - O Network Setting Items Option Contents Default Settings Using NetSpot Device Installer Settings Using FTP Client [Get Printer Management Information from Host] ON/OFF (SNMP_GET_PRT_MNG _INFO) OFF - O User Settings*1 Settings Using NetSpot Device Installer Settings Using FTP Client Option Contents Default [User Name] [MIB Access Permission] Up to 32 alphanumeric characters [Read/Write]/[Read Only] [Authentication Yes/ Encryption Yes]/ [Authentication Yes/ Encryption No]/ [Authentication No/ Encryption No] MD5/SHA1 6 to 16 alphanumeric characters Fixed at [DES] 6 to 16 alphanumeric characters initial - [Read/Write] - - 8 Appendix [Security Settings] [Authentication Yes/ Encryption Yes] - - [Authentication Algorithm] [Authentication Password]*2 [Encryption Algorithm] [Encryption Password]*2 MD5 - - initial - - DES - - initial - - *1 You cannot specify the setting depending on the printer model you are using. *2 Can be specified only if a hard disk is installed, and the printer is in the state of SSL encrypted communication. (If the printer is not in the state of encrypted communication, specify the setting using the printer's control panel. (See "Configuring the Communication Environment, " on p. [. . . ]