User manual CANON OFERTA APARATÓW DSC 2H2010 BROCHURE

[. . . ] For Users in the UK When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. While using the compact power adapter, do not wrap it or cover it with a piece of cloth, and do not place it in confined narrow spaces. [. . . ] LOCK Button Lock Press the CUSTOM KEY (1 or 2) button. Pressing the button will lock the EXP. LOCK button to prevent its accidental operation. Press the custom key button again to reactivate the EXP. LOCK button. 73 [CP BKWD KEY] Custom Preset Backward Key Press the CUSTOM KEY 2 button. Usually, pressing the CUSTOM PRESET SELECT button will cycle forwards to the following custom preset file. Pressing the custom key button instead will cycle backwards to the preceding custom preset file. CP backward key can only be operated with the custom keys. [SDI OUTPUT] SDI Output Press the CUSTOM KEY (1 or 2) button. The SDI output setup menu appears. [FOCUS LIMIT] Focus Limit ( 40) Press the CUSTOM KEY (1 or 2) button. The focus limit is activated. Press the button again to cancel it. [IMAGE STAB] Image Stabilizer ( 52) Press the CUSTOM KEY (1 or 2) button. The image stabilizer is activated. Press the button again to cancel it. [OUTPUT CH] Output Channel ( 81) headphone terminal) will change each time the button is Press the CUSTOM KEY (1 or 2) button. The audio channel being output (A/V1 terminal, pressed. 74 Color Bars/Audio Reference Signal You can generate and record color bars signals and a 1 kHz audio reference signal. With the customized functions ( 95) you can choose between EBU ([TYPE 1]) and SMPTE color bars ([TYPE 2]) and you can also select the strength of the audio signal (-12 dB, -18 dB, or -20 dB). 1. Select the standard of the color bars signal [COLOR BARS] and the strength of the audio reference signal [1kHz TONE] with the customized functions ( 95). Set the OUTPUT switch to BARS. The color bars appear and the audio reference signal is emitted (if activated). The [SIGNAL SETUP] [COMP. OUT] setting is not available. 2 Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal Use the HD/SD COMPONENT OUT terminal to monitor the video that the camcorder is recording and use the VIEWFINDER COMPONENT OUT terminal to monitor the picture on the viewfinder screen. Open the terminal cover INPUT Yellow White STV-290N Stereo Video Cable* (supplied) SD HD/SD VIDEO L AUDIO R Red Signal flow Green Blue Red DTC-1000 Component Video Cable (supplied) Signal flow Y Pb Pr * The audio signal is separate from the component video signal When using the HD/SD COMPONENT OUT terminal, select the appropriate component video signal depending on the TV or monitor you connect. Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option and close the menu. 78 3 Using the HDV/DV Terminal Open the terminal cover CV-250F DV Cable (optional) or commercially available 6 pin-6 pin DV cable 4-pin 6-pin When connecting the camcorder to a monitor or TV that supports DV input, you may need to carry out a procedure on the monitor or TV to recognize the camera. If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the following procedure ( mode only). Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting option and close the menu. 4 Using the A/V1 or VIDEO 2 Terminal VIDEO 2 terminal* Open the terminal cover STV-290N Stereo Video Cable (supplied) Signal flow Yellow INPUT VIDEO External Connections White Red L AUDIO R * To use the VIDEO 2 terminal, connect the camcorder and TV using a BNC cable (commercially available). We recommend powering the camcorder from a household power outlet. TV sets equipped with the WSS System: Recordings made with a 16:9 aspect ratio ( 32) will be played automatically in widescreen mode whether you connect the camcorder to the TV using the A/V1 terminal or the VIDEO 2 terminal. During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV standard, the picture may be distorted. 79 Connection to a Standard Definition TV or Monitor 1 Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal Refer to the connection diagram in the previous section ( 78). Select the appropriate component video signal depending on the TV or monitor you connect. Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option and close the menu. 2 Using the A/V1 or VIDEO 2 Terminal Refer to the connection diagram in the previous section ( 79). If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately. Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and close the menu. 3 Using the SCART Adapter SCART adapter (commercially available) STV-290N Stereo Video Cable (supplied) Signal flow Red White Yellow AUDIO AUDIO VIDEO (R) (L/MONO) If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately. Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and close the menu. We recommend powering the camcorder from a household power outlet. [. . . ] This is particularly useful while the camcorder is mounted on a tripod and you want to ensure maximum stability of a shot. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark. Additional Information 147 Specifications OFERTA APARATÓW DSC 2H2010 / XH A1S System Video Recording System Rotary head, helical scanning, digital component recording HDV High Definition Video 1080i DV Consumer digital VCR SD system HDV MPEG-1 audio layer 2, 16 bit (48 kHz), Transfer rate: 384 kbps (2CH) DV PCM digital sound, 16 bit (48 kHz) or 12 bit (32 kHz) HD High Definition Video (HDV) 1080/50i SD CCIR standard (625 lines, 50 fields) PAL color signal Videocassettes bearing the "MiniDV" mark. HDV 18. 83 mm/s DV SP: 18. 83 mm/s, LP: 12. 57 mm/s HDV 60 min. cassette) 1/3-inch CCD x 3 (horizontal pixel shift), approx. [. . . ]