User manual CANON OFERTA PROJEKTORÓW LV BROCHURE

[. . . ] Sound becomes distorted, or there is no sound during playback. The message "HEADS DIRTY, USE CLEANING CASSETTE" appears. If such symptoms appear, clean the video heads with the Canon DVM-CL Digital Video Head Cleaning Cassette* or a commercially available dry cleaning cassette. If the symptoms reappear shortly after the cleaning, the videocassette may be defective. [. . . ] Tape operation displays appear for 2 seconds. Warning messages and the data code (if activated) will appear, even when set to [ OFF<PLAYBK>]. All on-screen displays will appear while the playback image is magnified or a digital effect is activated. 6SEC. DATE [ ON], [ OFF] When you start playing back a tape or when the date of the recording changes, the date and time will be displayed for 6 seconds. Menu Options Lists 29 DATA CODE ( 37) SYSTEM SETUP BEEP [ [ OFF], [ DATE], [ DATE & TIME] LANGUAGE TIME], [ HIGH VOLUME], [ LOW VOLUME], [ OFF] A beep will accompany some operations like turning on the camcorder, the selftimer countdown, etc. It also serves as a warning beep under unusual conditions. POWER SAVE ( 19) The list of available languages depends on the region where you purchased the camcorder. Language Set A: [DEUTSCH], [ENGLISH], [ESPAOL], [FRANAIS], [ITALIANO], [POLSKI], [ ], [TRKE], [ ], [ ], [ ], [ ] Language Set B: [ENGLISH], [ ], [ ], [ ] DEMO MODE [ ON], [ OFF] In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for five minutes. Approximately 30 seconds before the camcorder shuts off, the message " AUTO POWER OFF" will appear. Date/Time Setup Advanced Functions [ ON], [ OFF] The demonstration mode displays the camcorder's main features. It starts automatically when the camcorder is powered with the power adapter if you leave it turned on without loading a recording media for more than 5 minutes. To cancel the demo mode once it started, press any button, turn off the camcorder or insert a videocassette. System Setup (Beep, etc. ) DATE/TIME SETUP T. ZONE/DST DATE/TIME DATE FORMAT ( ( 19) 20) [Y. M. D (2007. 1. 1 AM 12:00)], [M. D, Y (JAN. 1, 2007 12:00 AM)], [D. M. Y (1. JAN. 2007 12:00 AM)] Changes the date format for on-screen displays. 30 Recording Programs Recording Programs Using the Recording Programs Easy Recording The camcorder adjusts the focus, exposure and other settings automatically, allowing you to just point and shoot. : Recording Programs ( [ PROGRAM AE] The camcorder sets the aperture and shutter speed. 31) [ NIGHT] Use this mode to record in low-light conditions. [EXP] on the joystick guide changes to light blue and the exposure adjustment indicator and the neutral value "0" appear on the screen. If you operate the zoom during exposure lock, the brightness of the image may change. Adjust ( ) the brightness of the image as required. The adjustment range and the length of the exposure adjustment indicator will vary depending on the initial brightness of the picture. Pushing the joystick ( ) towards [EXP] again will return the camcorder to automatic exposure. Push the joystick ( ) towards [BACK] to save the exposure setting. Adjusting the Picture: Exposure, Focus and Color 33 Manual Focus Adjustment Autofocus may not work well on the following subjects. Reflective surfaces 4 5 Subjects with low contrast or without vertical lines Fast moving subjects Adjust ( ) the focus as necessary. Push the joystick ( ) towards for a farther focal distance or push it ( ) towards for a closer focal distance. Pushing the joystick ( ) towards [FOCUS] again will return the camcorder to autofocus. Push the joystick ( ) towards [BACK] to save the focus adjustment. NOTES The camcorder will automatically return to autofocus when you set the mode switch to . Through wet windows Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. BACK Night scenes POINTS TO CHECK ( Mode switch: BACK FOCUS Advanced Functions FOCUS 7) 1 2 1 2 3 Adjust the zoom. [. . . ] Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. Battery Packs When you need extra battery packs, select one of the following models: NB-2L, NB-2LH, BP-2L12, BP-2L14. CB-2LWE Battery Charger Use the battery charger for charging the battery packs. Battery Pack BP-2L5 NB-2L NB-2LH BP-2L12 BP-2L14 Charging Time* 70 min. 90 min. Additional Information 150 min. 170 min. * Charging time varies according to the charging condition. CBC-NB2 Car Battery Charger Use the car battery charger to charge battery packs on the move. [. . . ]