User manual CANON OPTURA 500

[. . . ] DIM-645 Digital Video Software Instruction Manual Manuel d'instruction Manual de Instrucciones Version 13 E F Es This instruction manual explains how to install the software, connect the camcorder to a computer, and download images from a memory card to a computer. For more detailed operational instructions, refer to the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows or DIGITAL VIDEO SOLUTION DISK For Macintosh. Ce manuel d'instruction explique comment installer le logiciel, connecter le camescope a l'ordinateur et telecharger des images a partir d'une carte memoire sur un ordinateur. Pour des instructions de fonctionnement plus detaillees, reportez-vous au manuel au format PDF fournie sur le disque DIGITAL VIDEO SOLUTION DISK For Windows ou DIGITAL VIDEO SOLUTION DISK For Macintosh. [. . . ] Be sure to install the Digital Video Software before you connect the camcorder to the computer. Connect the USB cable directly to one of the computer's main USB ports. The interface may not function correctly if the camcorder is connected via a USB hub. The connection may not operate correctly if you are using other USB devices, excluding USB mice or keyboards, at the same time. If this occurs, disconnect the other devices from the computer and try reconnecting the camcorder. Do not connect two or more camcorders to the computer. The camcorders may not operate normally. Never allow the computer to go into standby (sleep) mode while a camcorder is connected via the USB interface. Refer to your computer manual for the location of the computer's USB ports. See your camcorder instruction manual for connecting instructions. 4. Insert a memory card containing images into the camcorder. Connect the power adapter to the camcorder. Turn the POWER switch to PLAY (VCR) and move the TAPE/ CARD switch to CARD. Wait until the card access indicator stops flashing. Attach the supplied USB cable to the computer's USB port and the camcorder's USB Terminal. · The first time you connect the camcorder to the computer: - Installation of the DV TWAIN Driver (Windows 98/Windows 2000) or the DV WIA Driver (Windows Me) starts. - If the "Digital signature not found" message appears, click [Yes]. - After a few moments, a message such as "New Hardware Found" appears and the driver will be installed automatically. - If you are prompted to restart the computer, restart the computer. · Windows 98/Windows 2000/Windows XP: A window appears allowing you to select an application program to start. Windows Me: The Scanners and Cameras Wizard starts. Click [Cancel] to close the Wizard. 21 Windows Connecting the Camcorder to a Computer · For instructions on how to start ZoomBrowser EX and download images to the computer, see Downloading Images ( 23). USB Terminal on the Camcorder USB Cable Camcorder End Computer End USB Port on the Computer 22 Downloading Images (ZoomBrowser EX) Observe following precautions when the camcorder's card access indicator is flashing (the camcorder is reading or writing from or to the memory card). Failure to do so may cause memory card data to become corrupted. · Do not open the memory card cover, remove the memory card or detach the USB cable. · Do not turn off the camcorder or the computer. [. . . ] Mac OS X (version 10. 1/10. 2/10. 3): Select the [ (user name)] subfolder of the [Users] folder in [Macintosh HD]. Explorer View Section 2. Create a new folder for saving images from the memory card in the camcorder. Click the [File] menu and select [New Folder]. A folder with the name "Untitled" will be created. Click it to change the folder name as you wish. In this example, we will input "ZOO. " Explorer View Section 41 Macintosh 3. In the Explorer View Section, click the newly created folder. Downloading Images (ImageBrowser) 4. Select images in the Camera window and click [DOWNLOAD]. · You can select multiple images by holding down [Shift] or [Option] + [Shift] while clicking. [. . . ]