User manual CANON PC2 BROCHURE

[. . . ] HONOLULU OFFICE 210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA Instruction Manual Camescope vidéo numérique English Français Español Manuel d’instruction Videocámara digital Manual de Instrucciones G If you have any questions, call the Canon U. S. A. Information Center toll-free at 1-800-828-4040 (U. S. A. NATIONAL HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7 CANON CANADA INC. Calgary, Alberta T2E 7K7 CANON CANADA INC. [. . . ] If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality. When connecting a VCR: ❍ The quality of the edited tape will be slightly lower than that of the original. When connecting a digital video device: ❍ You can connect only one device to the camcorder with the DV cable. ❍ Blank sections may be recorded as anomalous picture. ❍ If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. ❍ Proper operation cannot be guaranteed for all digital video devices equipped with a DV terminal. If operation does not work, use the S-video or AV terminal. Example: Recording to a VCR CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA 1. Connect the camcorder to the VCR. See Playing Back on a TV Screen ( 40). 2. Set the camcorder to PLAY (VCR) mode and load a recorded cassette. Connected device: Load a blank cassette and set the device to record pause mode. Editing 4. Locate the scene you wish to copy and pause playback shortly before the scene. Connect the camcorder to the digital video device. See Connecting a Digital Video Device ( “DV IN” appears. Set the camcorder to PLAY (VCR) mode and load a blank cassette. Connected device: Load the recorded cassette. Press the REC PAUSE button. In record pause mode and during recording, you can check the picture on the screen. 5. Press the e/a button when the scene you wish to record appears. 7. Press the 3 button to stop recording. • Press the e/a button to pause recording. • Press the e/a button again to restart recording. 8. Connected Device: Stop playback. 99 Copyright Signal Certain software tapes are copyright protected. If you attempt to play back such tape, E “COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears and you will not be able to view the contents of the tape. If you attempt to record from such tape via the DV terminal, “COPYRIGHT PROTECTED DUBBING RESTRICTED” appears and you will not be able to record the contents of the tape. 100 Editing Converting Analog Signals into Digital Signals (Analog-Digital Converter) By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as output terminal only. [. . . ] This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required. Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. [. . . ]