User manual CANON PC2L BROCHURE

[. . . ] Ce manuel d’instruction explique comment installer le logiciel et le pilote Canon USB Video Driver (Windows XP uniquement), connecter le camescope à l’ordinateur et transférer des images à partir d’une carte mémoire sur un ordinateur. En este manual de instrucciones se explica cómo instalar el software y el controlador Canon USB Video Driver (Windows XP solamente), conectar la videocámara a un ordenador, y descargar imágenes de una tarjeta de memoria a un ordenador. NTSC Important Usage Instructions Introduction WARNING!TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING!TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, PC2L A systems This device complies with Part 15 of the FCC Rules. [. . . ] Turn the SET dial to select the focusing method. • Auto selection: a large frame will display on the screen. • Center point: a frame displays in the center of the screen. Advanced Functions Digital Camera Functions 85 Selecting the Drive Mode Records a single still image when you press the PHOTO button. Continuous Shooting Captures a quick series of still images while you press the High-Speed Continuous PHOTO button. For the number of frames per second, Shooting refer to the table on the next page. AEB The camcorder records a still image in three different (Auto Exposure Bracketing) exposures (dark, normal, light in 1/2 EV steps), allowing you to choose the perfect exposed shot. Single DRIVE MODE button PHOTO button Mode dial Changing the Drive Mode Available only in the mode. 1. Set the mode dial to a mode other than . Press the DRIVE MODE button to switch between the drive modes. The setting changes with each press of the button. The drive mode can also be selected from the FUNC. menu is being displayed, the DRIVE MODE button cannot be used. 86 Continuous Shooting/High-Speed Continuous Shooting 1. Press and hold the PHOTO button fully. A series of still images will be recorded as long as you hold the PHOTO button. Maximum number of continuous shots at one time: Still Image Size L 1632 x 1224 M 1280 x 960 S 640 x 480 Frames per Second Normal speed 2. 5 frames 3. 0 frames 3. 0 frames High speed 3. 0 frames 5. 0 frames 5. 0 frames Using the Flash 2. 1 frames 2. 5 frames 2. 5 frames Maximum Number of Continuous Shots 10 images 10 images 60 images E These figures are approximate and vary with the recording conditions and subjects. They may appear warped or doubled up. E Advanced Functions Digital Camera Functions 89 Playing Back/Searching Images You can display images one after another (slide show) or 6 at one time (index screen). With the Card Jump function, you can quickly locate an image without displaying them one by one. Available only in the mode. Zoom lever – button + button FUNC. button Slide Show ( 51) SLIDE SHOW 1. Select [ SLIDE SHOW] followed by [START]. Press the SET dial. • Images are played back one after another. • Press the button to stop the slide show. Index Screen 1. Move the zoom lever toward W. • Up to 6 images appear. • With movies, the index screen can only be started when the first scene is displayed as a still image. 2. Turn the SET dial to select an image. • Move the “ ” to the image you wish to view. • You can switch between the index pages by pressing the + or – button. 3. [. . . ] Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The digital video equipment is used for commercial, professional or industrial purposes. [. . . ]