User manual CANON PC3II BROCHURE

[. . . ] € To check the remaining power of a battery pack, attach a single battery pack to the adapter, and check the charge indicator. Unplug the adapter and disconnect the power cable from the adapter (Fig. To power your camcorder from a household power socket: 1. Connect the DC coupler to the camcorder (Fig. [. . . ] € Use only specified products with this adapter. € You can only use the BP-400 Series Battery Packs with this adapter. € Do not disassemble the adapter, do not get it wet, and do not expose it to shock or vibration, or to direct sunlight. Avoid exposure to high temperatures, such as in a closed car in hot weather, and do not leave it near heat–radiating equipment, such as a stove or heater. 3A DC Operating temperature range: 0°– 40°C (32°– 104°F) Dimensions: 75 × 99 × 51 mm (3 × 3 7/8 × 2 in) Weight: 210 g (7 3/8 oz) (without power cable) Weight and dimensions are approximate. Date d’achat Nom du dépositaire Adresse du dépositaire No de modèle CA-410 No de téléphone du dépositaire No de série 2 2 When the replacement of power supply is required, please return it to the responsible nearest Canon Service Center, and please replace it with the same type number CA-410 or equivalent. Box 2262, 1180 EG Amstelveen, the Netherlands PUB. For Users in the USA FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful innterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or the cabinet has been damaged. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts that are specified by Canon or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating order. nEC - NATIONAL ELECTRICAL CODE ELECTRIC SERVICE EQUIPMENT GROUND CLAMP Important Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and maintenance instructions should be followed. Cleaning – Unplug this product from the wall outlet before cleaning. [. . . ] Do not defeat the safety purpose of the polarized plug. Power Cord Protection – Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to plugs and the point from which the cords exit the product. Outdoor Antenna Grounding – If an outside antenna is connected to the product, be sure the antenna is grounded so as to provide some protection against voltage surges and built-up static charges. [. . . ]