User manual CANON PIXMA IP4500

[. . . ] The Print Head Lock Lever may feel heavy. Cover b emove the cover of the cassette. R c or A5 or larger sized paper, pull F Tab the tab towards you to unlock and extend the cassette. Important · Do not connect the USB cable until after the software is installed. · Plug the power cord all the way in, since it may be difficult to plug. d Insert the Print Head. d Make sure the ink lamp lights red. Install all ink tanks in order from right to left according to the colored label. c Press the POWER button to turn on the printer. Do not touch! e Push the Print Head to hold it in place, and lower the Print Head Lock Lever carefully. e Close the Inner Cover and the Top Cover. A5 or larger (nonstandard-size paper: 8 inches / 203 mm or more in length) 5" x 7" or smaller (nonstandard-size paper: less than 8 inches / 203 mm in length) d oad the paper into the cassette L Important If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. [. . . ] In Windows Vista, the screen may close automatically when the USB cable is unplugged. Then turn off the printer and proceed from step c to install the printer driver. Note · Print Head Alignment will take about 13 minutes to complete. · Do not open the Top Cover and Inner Cover while printing. Note · The pattern is printed in black and blue. · When Automatic Print Head Alignment cannot be executed properly, the ALARM lamp on the printer will flash orange eleven times. Refer to "ALARM Lamp Flashes Orange" in "Troubleshooting" of the Quick Start Guide. The pattern is printed, and the Print Head is aligned automatically. USB b Turn on your Mac and insert the Setup CD-ROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. k When the Setup Complete screen appears, click Next. l When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step m. After software installation is complete, double-click on the desktop. c Double-click the Setup icon. The setup program should run automatically. In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to Step f. Note · The pattern is printed in black and blue. · When Automatic Print Head Alignment cannot be executed properly, the ALARM lamp on the printer will flash orange eleven times. Refer to "ALARM Lamp Flashes Orange" in "Troubleshooting" of the Quick Start Guide. d When the Authenticate screen appears, enter your d If the AutoPlay screen appears, click Run Msetup4. exe. e If the User Account Control screen appears, click Continue. If the same screen reappears in subsequent steps, click Continue. k After print head alignment is completed, click Next. [. . . ] end of the USB cable to the computer, the other to the printer, then TURN THE PRINTER ON. The printer driver will begin identifying the printer port being used. h When the Start Setup screen appears, click Execute. i When the Printer Connection screen appears, confirm the displayed message and click Restart. The system is restarted automatically. Note Do not remove the Setup CD-ROM while your computer is being restarted. Software installation and print head alignment are now complete. i When the Printer Connection screen appears, connect one Part no. [. . . ]