User manual CANON PIXMA MINI260

[. . . ] Photo Printer Photo Printing Guide Table of Contents Introduction Before Printing Printing from the Memory Card Printing Photographs Directly from a Digital Camera Printing Photographs from a Wireless Communication Device Printing Maintenance Changing the Printer Settings Troubleshooting Appendix 2 3 18 31 36 42 52 55 73 US QT5-0760-V01 Getting Help from Canon Help Us Help You Better Before you contact Canon, please record the following information. Serial Number (located on the bottom face of the product): ________________ Model Number (located on the front of the product): ______________________ Setup CD-ROM number (located on the CD-ROM): ______________________ Purchase Date: __________________________________________________ Customer Technical Support Sequence* 1. Internet -- www. canontechsupport. com For quick and comprehensive self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and "where to buy" instructions are found here. 2. Email Tech Support -- www. canontechsupport. com For individual attention to a special issue, try emailing our friendly technical support representatives, specially trained to communicate quick, easy, and logical solutions to your inquiries within 24 hours. 3. [. . . ] Do not reattach the protective cap once you have removed it. Once the protective cap is removed, do not touch the open ink port. 50 Printing Maintenance 5 Insert the ink tank. (1) Insert a new ink tank slightly slanted toward the Print Head. (1) (2) Push down on the clicks into place. on the ink tank until it Ensure that the ink lamp is lit red. (2) 6 Close the Printer Cover. (2) (1) Lift the Printer Cover and pull the Lock Bar close. (2) Close the Printer Cover firmly until it clicks into place. (1) Printing Maintenance 51 Changing the Printer Settings This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Date display as an example. 1 2 Turn on the printer. See "Basic Operation for the Operation Panel" on page 7. (1) Select Device settings, then press the OK button. The Device settings screen is displayed. 3 Select the menu. (1) Select the setting item, then press the OK button. The setting screen for the selected item is displayed. (1) (2) Select the menu, then press the OK button. Example: select Date display. (2) 4 Change the settings. (1) Select the setting item, then press the OK button. Example: select MM/DD/YYYY. (1) 52 Changing the Printer Settings Print settings Ink drying wait time Use this setting only if the print surface becomes smudged. Important Be sure to set this back to Standard after printing since it take longer than usual for one printing. Wireless print settings For details, see "Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a PDA" on page 36. Bluetooth settings For details, see "Changing the Bluetooth Settings--Bluetooth settings" on page 41. PictBridge settings For details, see "Confirming and Changing PictBridge Print Settings from the Printer" on page 34. Other settings Date display Changes the display format of shooting dates when printed. Note When Date ON is selected for Date on the advanced print settings screen, the shooting date is printed in the date display format you selected. For the Advanced setting, see "Changing Print Settings--Advanced" on page 29. The shooting date format is as specified in the DPOF setting from DPOF printing. Changing the Printer Settings 53 Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. Important When you write the data on the memory card, connect the printer with the AC adapter. The printer cannot be set to the Read/write mode with using the optional battery. The printer can be set to the Read/write mode when using both the AC adapter and optional battery, but do not remove the AC adapter when you write the data on the memory card. If you set this setting to Read/write mode, card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to set it back to Read-only mode. And also, when you turned off the printer, the Read/write mode will be canceled and the setting is returned to the Read-only mode when you turn on the printer next time. Slide show setting Selects Image quality: Standard or Image quality: High for the image display quality of the slide show. Note When Image quality: High is selected, it may take time until images are displayed. Language selection Changes the language for LCD messages and menus. Reset setting You can change the settings back to the default, except for the LCD language and the position of the Print Head. Save settings Saves the settings for the settings screen. Load settings Loads the settings for the settings screen. 54 Changing the Printer Settings Troubleshooting Let's take a look at countermeasures against problems which may occur during use of the printer. Note Here, we will discuss errors indicated on the LCD, problems that might occur during direct printing from the digital camera. If you cannot find the symptom corresponding to a certain problem, refer to the User's Guide on-screen manual. "Error Message Is Displayed on the LCD" on page 55 "LCD Cannot Be Seen at all" on page 60 "An Unintended Language Is Displayed on the LCD" on page 60 "Cannot Install the Printer Driver" on page 61 "Cannot Connect to Computer Properly" on page 62 "Print Results Not Satisfactory" on page 63 "Printer Does Not Start or Stops During Print Jobs" on page 66 "Paper Does Not Feed Properly" on page 67 "Paper Jams" on page 68 "The POWER Lamp (blue) and ALARM Lamp (orange) Flash Alternately" on page 69 "Cannot Print Properly from the Digital Camera" on page 69 "Cannot Print Properly through Wireless Communication" on page 71 Error Message Is Displayed on the LCD Cause There are no photos in memory card. Action There are no image data stored on the memory card that can be read by this printer. The printer may not recognize the file if the file name or the folder path contains certain characters. Photo data edited or processed on a computer must be printed from the computer. [. . . ] NOTE THAT BY USING THIS SERVICE YOU WILL KEEP THE REPLACEMENT PRODUCT THAT IS SENT TO YOU. CANON USA WILL RETAIN THE DEFECTIVE PRODUCT THAT YOU ORIGINALLY PURCHASED, WHICH SHALL BECOME THE PROPERTY OF CANON USA. InstantExchange warranty program service is available only during the express limited-warranty period for your Product and only in the continental United States, Alaska and Hawaii during such period. This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. [. . . ]