User manual CANON PIXMA MP510

[. . . ] Important Do not connect the USB cable until after the software is installed. Important If an unintended language is displayed on the LCD, proceed setup to the end of step 3 "Install the Ink Tanks", and then refer to "An Unintended Language Is Displayed on the LCD" in "Troubleshooting" of the User's Guide on-screen manual to change the LCD language. 2 Install the Print Head a Remove the Print Head from its package. 3 Install the Ink Tanks a Peel back the orange tab completely and remove the plastic wrapper from the ink tank. Loading Paper This machine offers two paper sources to load printing paper; the Auto Sheet Feeder, found at the top of the machine, and the Front Feeder, found at the front of the machine. If the message <Install the print head and set the ink tank. > appears, go to e. e Lift the Scanning Unit (Printer Cover) open, and Scanning Unit (Printer Cover) set the Scanning Unit Support to hold the cover. [. . . ] · Before installing the driver, disable all anti-virus programs and automatically loading programs. f Read the License Agreement carefully and click Yes. M ac in to sh w s Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click OK. machine with a USB cable, then turn the machine on. The software will begin identifying the printer port being used. Important If you cannot go to the next procedure after 3 minutes, refer to "Troubleshooting" instructions in the User's Guide on-screen manual. Important Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v. 10. 2. 7 or earlier are not supported, do not connect the machine to these. Note · Use Mac OS X v. 10. 2. 8 to 10. 4. x. · The screens below refer to Mac OS X v. 10. 4. x installation. Screens may vary depending on the operating system you are using. · Log on as an Administrator before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. g When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application below. g When the Printer Connection screen appears, connect the h Read the License Agreement carefully and click Yes. a Turn off the machine. (1) Press the ON/OFF button. (2) Make sure that the POWER lamp stops flashing. Follow the on-screen instructions to install the software. Note When the User Registration screen appears, follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. i Follow the on-screen instructions to register your product. b Turn the computer on and start Windows. Important If you see the Found New Hardware Wizard, remove the USB cable. Then proceed from step 3 to install the MP Drivers. a Connect one end of the USB cable to the computer, the other to the machine. Note Make sure the machine is turned on. j When the Installation completed successfully screen appears, click Restart. The system is restarted automatically. c Insert the Setup CD-ROM. The setup program should run automatically. Note The setup program should run automatically. [. . . ] "Macintosh" and "Mac" are trademarks of Apple Computer, Inc. , registered in the U. S. "Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. [. . . ]