User manual CANON PIXMA MP800R

[. . . ] Photo All-in-One User's Guide ENG QT5-0266-V03 Getting Help from Canon Help Us Help You Better Before you contact Canon, please record the following information. Serial Number (located on the inside of the product): ____________________ Model Number (located on the front of the product): _____________________ Setup CD-ROM number (located on the CD-ROM): _____________________ Purchase Date:__________________________________________________ Customer Technical Support Sequence* 1. Internet -- www. canontechsupport. com For quick and comprehensive self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and "where to buy" instructions are found here. 2. Email Tech Support -- www. canontechsupport. com For individual attention to a special issue, try emailing our friendly technical support representatives, specially trained to communicate quick, easy, and logical solutions to your inquiries within 24 hours. 3. [. . . ] Is the machine you want to use selected in the settings screen of the Canon IJ Network Scan Utility?For details on the setting procedure, refer to the Scan Guide. Is the Canon IJ Network Scan Utility enabled?For details, see "Trouble scanning from the machine's Operation Panel over a wireless or wired LAN" on page 155. Note If you do not intend to send scanned images to a computer over a wireless or wired LAN using the Operation Panel on the machine, then you do not need the Canon IJ Network Scan Utility. To uninstall the Canon IJ Network Scan Utility, see "Uninstalling the Canon IJ Network Scan Utility" on page 167. 96 Scanning Images Chapter 8 Scanning Methods Scanning Using the MP Navigator MP Navigator enables you to scan in documents loaded on the Platen Glass and view images saved on a memory card or a computer used over a USB connection or a wireless or wired LAN. Scanned documents can be previewed and be easily printed and edited according to your needs. You can use the supplied application software to edit or print the document you have scanned. Double-click the [MP Navigator 2. 1] icon on your desktop to launch MP Navigator. Select [Applications] from the [Go] menu, then double-click the [MP Navigator 2. 1] icon to launch MP Navigator. You can launch the following application software from the MP Navigator. Easy-PhotoPrint (Photo Printing) ArcSoft PhotoStudio (Photo image editing) ScanSoft OmniPage SE (Converting scanned document to text)* * This application software may not be supplied with this machine in some country. Note If you did a [Custom Install] and only installed the MP Driver and MP Navigator, these application softwares were not installed and thus cannot be launched. To launch any of the above application software from MP Navigator, do a [Custom Install] once again to install them. For detailed operations of the MP Navigator, refer to the Scan Guide. Scanning Using the Operation Panel of the Machine You can scan documents to a computer connected over a USB connection or a wireless or wired LAN by using the Operation Panel on the machine. Important Do not insert or remove USB cables or LAN cables when scanning images with the machine connected to a computer, or when the computer is at sleep or standby mode. If you are using Windows XP The program selection screen is displayed the first time you press [Color] or [Black] on the machine. Specify [MP Navigator 2. 1] as the application software to use, check [Always use this program for this action], then click [OK]. From the next time, MP Navigator is automatically started. Chapter 8 Scanning Images 97 When using Mac OS X For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP Navigator as the starting application software in Image Capture under [Applications] of Mac OS X. Important If you are using Mac OS X v. 10. 4, the settings below are not necessary. Make sure that the MP Navigator is installed and that the Macintosh is connected to the machine before starting up Image Capture. If you are using Mac OS X v. 10. 3. x Select [Applications] from the [Go] menu, then double click [Image Capture]. Click [Options] at lower left of the scanner window, select [MP Navigator 2. 1] from [Application to launch when scanner button is pressed], then click [OK]. Select [Quit Image Capture] from the [Image Capture] menu to exit Image Capture. Important If you select [Preferences] from the [Image Capture] menu, click [Scanner], and mark [Use TWAIN software whenever possible], [Options] is not displayed. In this case, click [Use TWAIN software whenever possible] to uncheck the option, exit Image Capture, then start it again. If you are using Mac OS X v. 10. 2. 4 or later Select [Applications] from the [Go] menu, then double click [Image Capture]. Select [Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner button is pressed, open], select [MP Navigator 2. 1] from [Applications], then click [Open]. Select [Quit Image Capture] from the [Image Capture] menu to exit Image Capture. 1 2 3 Press [ON/OFF] to turn on the machine. See "Turning on the Machine" on page 18. Load the document on the Platen Glass. For details on how to load documents, see "Loading Documents" on page 19. [. . . ] InstantExchange warranty program service is available only during the express limited-warranty period for your Product and only in the continental United States, Alaska and Hawaii during such period. This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. * Support program specifics are subject to change without notice. ** InstantExchange warranty service is subject to the availability of refurbished or new replacement units. [. . . ]