User manual CANON PIXMA MP970

[. . . ] The Print Head Lock Lever may feel heavy. c Insert the ink tank into the right-hand slot and press the into place. mark on the ink tank until it clicks Cover Guide c Make sure that Yes is selected in the message requesting head alignment, then press the OK button. d Insert the Print Head. Paper Output Tray Extension d Make sure the ink lamp lights red. Sheet Feeder Cover Do not touch!Refer to the color guide on the Print Head Lock Lever. Important · Make sure that the Document Cover is closed. · Do NOT connect the USB cable at this stage. c Open the Operation Panel, then press the ON/ OFF button to turn on the machine. The machine will initialize. Wait until the Power lamp stops flashing and remains lit blue. Caution For your safety, always firmly grip the areas illustrated when lifting the Scanning Unit (Printer Cover). [. . . ] Screens may vary depending on the operating system you are using. · Log into a user account with the administrator privilege. · Before installing the software, disable all anti-virus programs and automatically loading programs. · A message asking for your confirmation to restart your computer may appear during the installation process. If this message is displayed, follow the on-screen instructions and click OK. The installation resumes from where it left off when your computer has been restarted. · If the computer is restarted during installation, do not remove the Setup CD-ROM during restarting. software installation screen may appear during the installation process. Follow the on-screen instructions to install the software. printer via USB, then click Next. i When the Setup Method screen appears, select Use the M Note · Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v. 10. 2. 7 or earlier are not supported, do not connect the machine to these. · The screens below refer to Mac OS X v. 10. 4. x installation. Screens may vary depending on the operating system you are using. · Before installing the software, disable all anti-virus programs and automatically loading programs. ac in i When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step j. After software installation is complete, double-click on the desktop. a Connect one end of the USB cable to the computer and the other to the machine. Note Make sure the machine is turned on. a Be sure to TURN THE MACHINE OFF before continuing. (1) Press the ON/OFF button. (2) Make sure that the Power lamp stops flashing. Follow the on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. b Turn the computer on and start Windows. Important If the Found New Hardware or Found New Hardware Wizard screen appears automatically, remove the USB cable connected to your computer. In Windows Vista, the screen may close automatically when the USB cable is unplugged. Then turn off the machine and proceed from step c to install the software. j When the Printer Connection screen appears, connect one end of the USB cable to the computer, the other to the machine, then TURN THE MACHINE ON. [. . . ] After software installation is complete, double-click on the desktop. Note If you want to select particular items to install, click Custom Install and follow the onscreen instructions to proceed with the installation. Follow the on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. f When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. Software installation is now complete. m When the PIXMA Extended Survey Program screen f When the main menu appears, click Easy Install. The MP Drivers, On-screen Manuals, and application software are installed automatically. appears, confirm the message. [. . . ]