User manual CANON PIXMA PRO9500

[. . . ] If your PC does not support USB 2. 0 Hi-Speed, or if any non-certified USB 2. 0 cable or driver is used for the connection, the printer will operate at a lower speed provided under USB 1. 1. USB Port Ink Port from the Print Head. 3 Insert the ink tank into the rightmost slot. Press the mark on the ink tank until it clicks into place and then its lamp lights red. USB Cable USB Port Front Tray PIXMA Pro9500 series Print Head 3 The Print Head Holder automatically moves to the center. Remove the protective tape from the Print Head Holder. The tape position is subject to change. CAUTION: There might be some transparent or light color ink on the inside of the protective cap - this has no effect on print quality. [. . . ] When the Printer List screen appears, select Pro9500 series from the Name list, then click Utility (Configure when using Mac OS X v. 10. 2. 8) icon. To maintain optimal print quality, press the RESUME/CANCEL button on the printer about once a week to shake the ink tanks. NOTE: For details, refer to "Shaking the Ink Tanks Periodically" in the Quick Start Guide. continuing. 2 Turn on the computer and start Windows. NOTE: · For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. IMPORTANT: If you see the Found New Hardware Wizard, remove the USB cable. Then proceed from step 3 to install the printer driver. IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions. mn olu C If a message asking for your confirmation to restart your computer appears, click OK. The system is restarted automatically. 8 When the Print Head Alignment screen Introduction to the Front Paper Feeding the Setup CD-ROM. If the CD-ROM folder does not open automatically, double-click the on the desktop. NOTE: Log on as an Administrator before continuing. 2 Double-click the Setup icon. appears, ensure that two sheets of letter size paper are loaded in the Auto Sheet Feeder (top paper feeder). Click Execute, read the message and click Print Head Alignment. You can load paper in both the Auto Sheet Feeder and the Front Tray. If the printer is not displayed on the Printer List, click Add to add the printer. For details, follow the instructions in Mac Help. Select Pro9500 series from the Product list and click Maintenance. Ensure that two sheets of letter size paper are loaded in the Auto Sheet Feeder (top paper feeder). Click the down-arrow to select Test Print. Click the Print Head Alignment icon, read the message and click Print Head Alignment. Front Tray Loading paper in the Front Tray to print on large size paper or to print on thick paper such as art paper. NOTE: When the Authenticate screen appears, enter your administrator name and password, then click OK. If you do not know your administrator name or password, click on the lower-left corner of the screen, then follow the on-screen instructions. 3 When the main menu appears, click Easy Install and then Install, then follow the onscreen instructions. NOTE: · Print head alignment will take about nine minutes to complete. [. . . ] If you intend to register later, double-click on the desktop after Step 11 . · If your computer is not connected to the Internet, click Next. 7 Go back to the User Registration screen, then by printing the patterns below. click Next. 12 When the User Registration screen appears, click Register. NOTE: · Follow on-screen instructions to register your product. [. . . ]