User manual CANON PIXMA TINTENSTRAHLDRUCKER & MULTIFUNKTIONSGERÄTE SAMMELPROSPEKT BROCHURE

[. . . ] · Lift the Document Cover and Scanning Unit (Printer Cover) together. Note Do not touch the print head nozzles or the electrical contacts. Important · Do not touch the electrical contacts. · Do not touch the ink port. c Firmly raise the Print Head Lock Lever until it c Insert the ink tank into the right-hand slot and press the into place. stops. The Print Head Lock Lever may feel heavy. mark on the ink tank until it clicks Cover Guide f Open the Inner Cover. Write down the serial Important Make sure that the Document Cover is closed. number located inside the machine. You will need this to register your product. c Open the Operation Panel, then press the ON/ OFF button to turn on the machine. c Make sure that Yes is selected in the message requesting head alignment, then press the OK button. d Insert the Print Head. Inner Cover Serial Number Location Do not touch! d Make sure the ink lamp lights red. Refer to the color guide on the Print Head Lock Lever. d Use the { or } button on the Operation Panel to select the language for the LCD, then press the OK button. e Push the Print Head to hold it in place, and lower the Print Head Lock Lever. e Close the Inner Cover and the Scanning Unit (Printer Cover). Note Print Head alignment takes about 13 minutes to complete. [. . . ] And Print Head is aligned automatically. (1) Press the { or } button to select the language. OK (2) Press the OK button. Important If an unintended language is displayed on the LCD, press the Back button to return to the Language selection screen. Important If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. Once the message "Install the print head and set the ink tank. " appears, go to e. Important · For your safety, always firmly grip the areas illustrated when closing the Scanning Unit (Printer Cover). · The machine starts the preparatory operation. Do not start another operation until the machine has stopped making operating noises. Note · The pattern is printed in black and blue. · When Automatic Print Head Alignment cannot be executed correctly, the message "Auto head align has failed. " is displayed on the LCD. Refer to "An Error Message is Displayed on the LCD" in the Quick Start Guide. Hardware setup and Print Head alignment are complete. Windows® Software Installation w s Macintosh® Software Installation to M ac in sh W in do Note · The screens below refer to Windows VistaTM operating system Ultimate Edition (hereafter referred to as "Windows Vista") installation. Screens may vary depending on the operating system you are using. · Log into a user account with the administrator privilege. · Before installing the driver, disable all anti-virus programs and automatically loading programs. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. Note · When using Mac OS X v. 10. 2. 8 to v. 10. 3. x, before using the Operation Panel on the machine to save originals scanned from the Platen Glass to the computer, it is necessary to select MP Navigator EX as the launch application on Image Capture under Applications. For details, refer to "Scanning Images" in the User's Guide onscreen manual. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. j When the Setup Complete screen appears, click Next. The setup program should run automatically. In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to Step f. c Double-click the Setup icon. d When the Authenticate screen appears, enter your administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. The MP Drivers, On-screen Manuals, and application software are installed automatically. e When the main menu appears, click Easy Install. d If the AutoPlay screen appears, click Run Msetup4. exe. k When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step l. After software installation is complete, double-click on the desktop. Software installation is now complete. e If the User Account Control screen appears, click Continue. If the same screen reappears in subsequent steps, click Continue. Follow the on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. l When the PIXMA Extended Survey Program screen appears, confirm the message. [. . . ] We would appreciate it if you would take part in this program regarding the use of Canon printers. appears, click Exit. Note If you want to select particular items to install, click Custom Install and follow the onscreen instructions to proceed the installation. f When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. m When the Installation completed successfully screen f When the main menu appears, click Easy Install. The MP Drivers, On-screen Manuals, and application software are installed automatically. If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Remove the CD-ROM after clicking Restart and restarting the computer. Note Keep the CD-ROM in a safe place in case you need to reinstall the software. g Read the License Agreement carefully and click Yes. [. . . ]