User manual CANON POWERSHOT S1IS

[. . . ] ENGLISH DIGITAL CAMERA Camera User Guide Camera User Guide CDI-E104-010 XXXXXXX © 2004 CANON INC. PRINTED IN JAPAN Please read the Read This First section (p. Please also see the Software Starter Guide and the Direct Print User Guide. Disclaimer While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon Inc. [. . . ] The AUTO setting selects the optimal ISO speed. It will automatically raise the speed when the light from the flash is insufficient to illuminate the subject matter. , , and modes only 82 6. Shooting-Advanced Functions You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 2 1, 3 , 1 Press the FUNC. 2 Select * (Effect Off) using the or arrow and select the desired setting using the or arrow. * The current setting is displayed. When is selected A screen allowing you to set the contrast, sharpness and color saturation appears when you press the SET button. Select the item you wish to set using the or arrow, set it using the or arrow and press the SET button. Contrast This function allows you to adjust the degree of brightness. Select from - (Weak), 0 (Neutral) and + (Strong). Sharpness This function allows you to adjust how sharply outlines are defined. Select from - (Weak), 0 (Neutral) and + (Strong). Saturation This function allows you to adjust the color depth. Select from - (Weak), 0 (Neutral) and + (Strong). 3 Press the FUNC. button. The white balance cannot be set when (Sepia) or (B/W) mode is selected. 6. Shooting-Advanced Functions 83 Auto Exposure Bracketing (AEB Mode) Mode Dial 2 Select In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. You can adjust AEB settings in 1/3 stops within the range of -2EV to +2EV of the standard exposure setting. AEB settings can be combined with exposure compensation settings (p. The images are recorded in the following order: Standard exposure, underexposure and overexposure. * (BKT-Off) using the or arrow. * The current setting is displayed. 3 Select (AEB), press the SET button and adjust the compensation range using the or arrow. Use to expand the range and to contract it. You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 2, 3 3 1, 4 , 1 Press the FUNC. Shooting-Advanced Functions 4 Press the FUNC. button. Select (BKT-Off) in Step 3 to cancel the AEB mode. The AEB mode cannot be used for flash photography. If the flash fires, only one image gets recorded. Focus Bracketing (Focus-BKT Mode) Mode Dial 2 Select You can shoot three images while the focus changes automatically when shooting with the manual focus. Three ranges -small, medium or large- can be selected. [. . . ] The cables with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subject B of Part 15 on the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. One Canon Plaza, Lake Success, NY 11042, U. S. A. [. . . ]