User manual CANON POWERSHOT SD1300 IS BROCHURE

[. . . ] : This mark denotes additional topics that complement the basic operating procedures. You can use SD memory cards, SDHC memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. Use of genuine Canon accessories is recommended. [. . . ] 19). 2 Use the or button to select an image to protect and press . Pressing the FUNC. /SET button again cancels the setting. You can also protect images in the index playback mode. Protection Icon 66 Viewing Images on a TV Set You can play back images on a television with the supplied AV cable. 1 2 Turn off the camera and the TV. Connect the AV cable to the camera's A/V OUT terminal. Slip your fingernail under the lower end of the camera's terminal cover, lift it open and plug the interface cable in all the way. Playback/Erasing 3 Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. VIDEO AUDIO Yellow Black 4 5 Turn on the TV and switch it to video mode. Turn on the camera. 67 When the camera is set to shooting mode, you can take pictures while displaying images on the television. The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. The default setting varies between regions. - NTSC: Japan, U. S. A. , Canada, Taiwan and others - PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly. Erasing All Images Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Protected images cannot be erased with this function. 1 (Play) Menu . See Menus and Settings (p. 19). 2 Select [OK] and press . To exit instead of erasing, select [Cancel]. Please format the memory card when you want to erase not only image data but also all the data contained on the memory card (p. Prints the selected images together at a reduced size in an index format. Prints the images in both the standard and index formats. Clears all print settings after the images print. 1 (Print) Menu [Print Settings] . See Menus and Settings (p. 19). 2 Use the or button to select (Print Type), (Date), (File No), (Clear DPOF data) and then use the or button specify the settings. 72 The Date and File No. settings change according to the Print Type as follows. - Index (Date) and (File No. ) cannot be set to [On] at the same time. - Standard or Both (Date) and (File No. ) can be set to [On] at the same time, however, the printable information may vary between printers. Images dated using (Postcard Date Imprint mode) (p. 33) are always printed with the date, regardless of the (Date) setting. As a result, if (Date) is also set to [On], the date will end up being printed twice on these images. Dates print in the style specified in the (Date/Time) menu (p. [. . . ] Basic 10 Shutter Volume. . . . . . . . . . . . . . . . . . . . . . . Basic 15 Smooth Continuous Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic 12 Sound Memo . . . . . . . . . . . . . . . . . . . . . . . . . . 64 W White Balance . . . . . . . . . . . . . . . . . . . . . . . [. . . ]