User manual CANON PROFESSIONAL PRINT ÖVERSIKT BROCHURE

[. . . ] These cards are collectively called memory cards in this guide. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. 1 Table of Contents Items marked with a are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide . [. . . ] 23). 2 Use the or button to select an image to to rotate it. rotate and press Cycle through the 90°/270°/original orientations with each press of the FUNC. /SET button. This also can be set in the index playback mode. When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images. 76 Playback with Transition Effects You can select the transition effect displayed when switching between images. The displayed image darkens and the next image gradually brightens until it is displayed. Press the left and the right. button to have the previous image display from the button to have the next image display from the 1 (Play) Menu *Default setting. / */ . See Menus and Settings (p. 23). 77 Playback/Erasing Adding Effects with the My Colors Function You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p. 54. Vivid Neutral Sepia B/W Positive Film Lighter Skin Tone Darker Skin Tone Vivid Blue Vivid Green Vivid Red 1 (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image and press . 3 Use the or button to select the My Colors type and press . The displayed image will reflect the My Colors effect. You can press the button to check the image at a higher magnification. While the image is zoomed, you can press the or button to switch between the image transformed with the My Colors effect and the original non-transformed image. 78 4 Select [OK] and press . The newly saved image transformed with the My Colors effect will be the last one in the list. The new image first appears in a cross shape and gradually expands to display the full image. Portions of the new image move horizontally, then the image expands to display the full image. Playback/Erasing In single image playback mode, you can start a slide show from the current image displayed by holding the FUNC. /SET button while you press the button. Please note that if you do this while the last image shot is displayed, the slide show will start from the first image using the same date. 83 Select a date/category/folder to play back (//) 1 2 Select , or and press . Use the or button to select a date/ category/folder to play back and press the button. Date My Category Folder 84 Selecting Images for Playback ( ­ ) Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). They will be played back in their order of selection. 1 Select , or and press . Only the icon will display at first. When you set , the icon will change to and will display. and will change in the same way when they are set. 2 Use the or button to move between images for playback and press to select or deselect them. You can also select images in the index playback mode. Pressing the MENU button completes the setting. Check mark indicating selection Number indicating the selection order Playback/Erasing Selecting All Images 1 After selecting ­ in step 1, use the button to select [Mark all] and press the FUNC. /SET button. 2 Use the button to select [Mark all], press the FUNC. /SET button. 3 Use the button to select [OK] and press the FUNC. /SET button. To deselect all images, select [Reset]. 85 Adjusting the Play Time and Repeat Settings Play Time Sets the duration that each image displays. Choose between 3*­10 seconds, 15 seconds and 30 seconds. [. . . ] The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. One Canon Plaza, Lake Success, NY 11042, U. S. A. [. . . ]