User manual CANON REALIS WX6000 PRO AV BROCHURE

[. . . ] • Charging the battery pack takes approximately 80 minutes. 2 3 Open the card slot/battery cover. 1 Install the battery. • Press the battery lock while inserting the battery pack. Battery lock card 4 Install the CFcover. and close the CF card slot/battery • Insert the CF card with the label facing out and push the card in until the CF card eject button fully extends. CF card eject button 5 Open the lens cover. The camera powers up into Shooting mode. 3 Shooting 1 2 Turn the Shooting Mode dial to . Set the date and time. (First time the camera is powered on) • The Set Date/Time menu will appear on the LCD monitor. • Select the items you wish to set using B or A on the multicontroller and set the value using C or D on the multicontroller. • To put the settings into effect, press . 3 Focus. • Aim the camera and lightly press the shutter button halfway. Two beeps will sound when the autofocus is set. 4 4 Shoot. • Press the shutter button all the way. [. . . ] • 1st-curtain* • 2nd-curtain Slow Synchro Sets the slow synchro. • On • Off* Flash Adjust Sets whether or not the flash is adjusted automatically. • Auto* • Manual Red-eye Sets whether or not the red-eye reduction lamp fires. • On* • Off Spot AE Point Sets the Spot AE Point option, Center (the AE point is fixed to the center) or AF Point (the AE point corresponds to the AF point). • Center* • AF Point Sets whether or not the focusing point is magnified when using the manual focus. • On* • Off MF-Point Zoom 7 *Default setting Item AF-assist Beam Menu Screen Settings Content Sets the output of the AF-assist beam according to shooting conditions when using the auto focus. • On* • Off Sets whether or not the digital zoom combines with the optical zoom to zoom images. • On • Off* Sets the duration images display on the LCD monitor after the shutter button is released. • Off • 2 sec. * to 10 sec. Digital Zoom Review Intervalometer Shoots automatically at set intervals. Save Settings Saves settings selected in the shooting menu and the function menu to the shooting mode dial's C mode. 8 Replay Menu Item Protect Menu Screen Settings Content Protects images from accidental erasure. Rotate Rotates images 90 or 270 degrees clockwise in the display. Erase all Erases all images from a CF card (excluding protected images). Slide Show Plays images in an automated slide show. Print Order Sets the images that will be printed on a DPOF-compatible printer or at a photo lab service, the number of copies and other parameters. Transfer Order Sets the images that will be transferred with your e-mail software. 9 Set up Menu Item Beep Menu Screen *Default setting Settings Content Sets whether or not the beep sounds when the shutter button is pressed or when a menu operation is performed. • On* • Off (Still beeps to warn of an error even when set to Off) Sets the brightness level of the LCD monitor. (Normal)* • • (Bright) LCD Brightness Auto Power Down Sets whether or not the camera automatically powers down after a specified period of time elapses without something being pressed. There is no shutter sound while a movie is being shot. (Off) • • * • • Start-up Image Start-up Sound Operation Sound Selftimer Sound Shutter Sound 13 Printing Images by Connecting the Camera Directly to a Printer Printing with a Direct Print Compatible Printer By connecting the camera with a single cable to a direct print function compatible printer (optional), you can easily print your images with simple operations. 1 2 3 Load the ink cassette and the paper cassette into the printer. Ink cassette Paper cassette Connect the power cord to the printer and connect the camera to the printer. • With the CP-10 printer, the printer’s power turns on automatically. Press the printer’s ON/OFF button to turn on the power. • appears on the camera’s LCD monitor and the power/mode indicator is lit in green. • If you cannot use the camera's compact power adapter*, please use a fully charged battery pack. Canon Camera compatible with the direct print function To DIGITAL Terminal Camera’s Compact Power Adapter* To Power Outlet To Power Outlet Direct Interface Cable DIF-100 14 * Included with the optional AC Adapter Kit ACK700 Choose an image using B 4 multicontroller and press or A on the . 5 Choose [Print] using C, D, B or A on . the multicontroller and press • The image will start to print and, when it is completely finished, the display will revert to standard replay mode. Printing with a Direct Print Function Compatible Bubble Jet Printer By connecting the camera with a single cable to a direct print function compatible BJ printer (optional), you can easily print your images with simple operations. 1 2 3 Prepare the printer. • For more information, please see the Quick Start Guide that came with your BJ printer. Power button Turn the BJ printer's power on. Connect the camera to the BJ printer. • Connect the camera to the printer using the cable supplied with your BJ printer. 15 • The camera powers up and the panel. icon appears on the BJ printer's operation Camera icon • appears on the camera’s LCD monitor and the power/mode indicator lights green. Choose an image using B 4 multicontroller and press or A on the . 5 Choose [Print] using C, D, B or A on the multicontroller and press . • The image will start to print and, when it is completely finished, the display will revert to standard replay mode. • We recommend the use of the AC Adapter Kit ACK700 (optional) as the camera's power source. • Images cannot be printed through the BJ printer operation panel during the camera connection. • Please use the following procedures when you detach the cable from the printer and the camera. Detach the cable from the camera. 16 Downloading Images to a Computer (Windows) System Requirements Computer Model OS IBM PC/AT compatible Windows 98 (First or Second Edition) Windows Millennium Edition (Windows Me) Windows 2000 Windows XP Windows 98 / Windows Me / Windows 2000 : Pentium 150MHz or better Windows XP : Pentium 300MHz or better Windows 98 / Windows Me / Windows 2000 : 64MB or more Windows XP : 128MB or more USB: Only preinstalled Windows 98 / Windows Me / Windows 2000 / Windows XP CPU RAM Interface • All procedures performed with a connection to a USB 2. 0 compliant board are not guaranteed. Installing the Software • Do not connect the camera to the computer before the software is installed. • The USB driver will start its installation procedures after the camera has been connected to the computer. • Users of Windows 2000 and Windows XP Professional must first log in as an Administrator (computer system administrator) to install programs. • Close any programs that are running. 1 Place the Canon Digital Camera Solution Disk into your computer’s CD-ROM drive. • The installer panel will display automatically. 17 • If the installer panel does not appear automatically, use the following procedures to display it. [. . . ] Terminal cover Installing the Driver ■ Windows XP 1 Install the driver. • After a few moments, the following dialog will appear at the bottom right of the screen and the WIA driver will automatically install. • After installation, the Event dialog will appear, allowing you to select an application program to start. 2 Select an application to start. • Select [Canon ZoomBrowser EX] and click [OK]. • With Windows XP, the Event dialog does not appear the first time the camera is connected after computer start-up. is complete and the installer panel appears, 5 Remove the Canon Digital Camera Solution Disk from the CDROM drive. Connecting the Camera to the Computer 1 Connect one end of the USB cable to the computer’s USB port. USB port USB cable 25 2 Connect the USB cable to the camera’s Digital terminal. • Open the terminal cover and connect the cable. 2. USB cable Insert the connector until it clicks. Mac OS 8. 6-9. 2 1. Terminal cover • ImageBrowser will start and open the ImageBrowser Automation Wizard dialog. [. . . ]