User manual CANON S600

[. . . ] S600TM Color Bubble JetTM Printer Quick Start Guide Canon S600 Color Bubble Jet Printer Quick Start Guide. Copyright This manual is copyrighted by Canon U. S. A. , Inc. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U. S. A. , Inc. has reviewed this manual thoroughly in order that it will be an easy to use guide to your Canon S600 Color Bubble Jet Printer. [. . . ] See the S600 User's Guide on the Setup Software & User's Guide CD-ROM for more information. 27 Troubleshooting Problem Printer is not responding (continued) Possible Cause Bad cable Computer and/or printer needs to be reset Ink tanks are not seated properly Printhead clogged Replace the printer cable. Reboot the computer and/or reset the printer. To reboot the computer, close all open applications, then restart. To reset the printer, turn it off, then on again. Check the ink tanks, and reseat them if necessary. See "Replacing Ink Tanks" on page 20. Verify that the printhead is working properly. See "Printing a Nozzle Check Pattern" on page 20 or "Cleaning the Printhead" on page 22. If necessary, perform multiple printhead cleanings. See the S600 User's Guide on the Setup Software & User's Guide CD-ROM for more information. Ink tanks may need to be replaced Verify that you have sufficient ink in the ink tanks. See "Monitoring Ink Levels" on page 19. See "Replacing Ink Tanks" on page 20. Verify that the printhead is working properly. See "Printing a Nozzle Check Pattern" on page 20 or "Cleaning the Printhead" on page 22. If necessary, perform multiple printhead cleanings. See "Cleaning the Printhead" on page 22 or the S600 User's Guide on the Setup Software & User's Guide CD-ROM for more information. Try This Printer tried to print but no ink on paper Printhead may need to be replaced Troubleshooting Printed Output Problem Printed colors are incorrect Possible Cause One or more ink tanks installed in the wrong position Try This Verify that each ink tank is lined up with the correct color label in the printhead. For more information, see "Replacing Ink Tanks" on page 20. If ink tanks were placed in the incorrect color slots in the printhead, after switching the tanks to their correct slots, perform at least two printhead cleanings to remove the incorrect residual colors from the printhead. For procedures, see "Cleaning the Printhead" on page 22. On the Main tab of the S600 Properties window, confirm that Color Adjustment is set to Auto Auto. [. . . ] 13 troubleshooting bad printouts . . . . . . . . . . . . . . . . . . . . . . 28 troubleshooting problems with . . . . . . . . . . . . . . . . . . . . . 27 printing color images in grayscale . . . . . . . . . . . . . . . . . . . . 13 problems, what to do to fix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]