User manual CANON S800

[. . . ] CA-570 identification plate is located on the bottom. 2 Using this Manual Thank you for purchasing the Canon MV800i/MV800/MV790. Please read this manual carefully before you use the camcorder and retain it for future reference. Change the display language before you begin ( 65). E Symbols and References Used in This Manual : Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures. [. . . ] Select [D. E. SELECT] and set it to [FADER]. Select [FADER TYPE], select a setting option and close the menu. The name of the selected fader flashes. Fade in: In record pause mode, press the DIGITAL EFFECTS ON/OFF button and begin recording by pressing the start/stop button. Fade out: During recording, press the DIGITAL EFFECTS ON/OFF button and pause recording by pressing the start/stop button. The fader can be activated/deactivated by pressing the DIGITAL EFFECTS ON/OFF button. Fade in: In playback pause mode, press the DIGITAL EFFECTS ON/OFF button and begin playback by pressing the / button. Fade out: During playback, press the DIGITAL EFFECTS ON/OFF button and pause playback by pressing the / button. The fader can be activated/deactivated by pressing the DIGITAL EFFECTS ON/OFF button. Selecting an Effect In CAMERA mode, set the program selector to CAMERA PLAY (VCR) . 1. Open the menu and select [D. EFFECT SETUP]. Select [D. E. SELECT] and set it to [EFFECT]. Select [EFFECT TYPE], select a setting option and close the menu. The name of the selected effect flashes. 4. Press the DIGITAL EFFECTS ON/OFF button. · The name of the selected effect stops flashing. · The effect can be activated/deactivated by pressing the DIGITAL EFFECTS ON/OFF button. 56 Using the Multi-Image Screen You can operate the multi-image screen only in the following playback modes: · When [M. S. SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback · When [M. S. SPEED] is set to [FAST], [MODERATE] or [SLOW]: Playback pause In CAMERA mode, set the program selector to . CAMERA PLAY (VCR) E 1. · A frame appears indicating the position of the magnified area. · To further enlarge the image, move the zoom lever toward T. To shrink the image below 2 times magnification, move the zoom lever toward W. Advanced Functions Playback 2. Select the magnified area with the SET dial. · Turn the SET dial to move the image to the right and left, or up and down. Pressing the SET dial switches between the directions. · To cancel the magnification, move the zoom lever toward W until the frame disappears. 59 Displaying the Data Code The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). When you play back a tape, you can display the data code and select the data code combination you wish to display. DATA CODE button SET dial MENU button Selecting the Date/Time Display Combination CAMERA PLAY (VCR) MENU ( 34) DISPLAY SETUP/ D/TIME SEL. ··DATE & TIME Open the menu and select [DISPLAY SETUP/ ]. Select [D/TIME SEL. ], set it to [DATE] or [TIME] and close the menu. Selecting the Data Code Display Combination CAMERA PLAY (VCR) MENU ( 34) DISPLAY SETUP/ DATA CODE····DATE/TIME Open the menu and select [DISPLAY SETUP/ ]. Select [DATA CODE], set it to [CAMERA DATA] or [CAM. & D/T] and close the menu. 60 Displaying the Data Code CAMERA PLAY (VCR) Press the DATA CODE button. The data code will not display the next time you turn on the camcorder. E Six-Second Auto Date Date and time appear for 6 seconds when you begin playback, or to indicate that date or time zone has changed. CAMERA PLAY (VCR) MENU ( 34) DISPLAY SETUP/ 6SEC. DATE····OFF Open the menu and select [DISPLAY SETUP/ it to [ON] and close the menu. ]. Select [6SEC. DATE], set Advanced Functions Playback 61 End Search When you have played back a tape, you can use this function to locate the end of the last recorded scene. END SEARCH button CAMERA PLAY (VCR) In stop mode, press the END SEARCH button. · "END SEARCH" appears. [. . . ] Adjust the volume with the SET dial. No sound from the built-in speaker. Speaker volume is turned off. Editing Problem Dubbing via the camcorder's DV terminal does not work. Set [AV Wrong signal format. Solution DV] to [OFF]. 73 ­ Dubbing may work via the AV terminal. Refer also to the instruction manual of the connected device. 86 System Diagram WS-20 Wrist Strap (Availability differs from area to area) E Shoulder Strap CBC-NB2 Car Battery Charger WD-28 Wide-converter MiniDV Video Cassette CB-2LTE Battery Charger TL-28 Tele-converter NB-2L, NB-2LH, BP-2L12, BP-2L14 Battery Pack CA-570 Compact Power Adapter FS-28U Filter Set NB-2L, NB-2LH, BP-2L12, BP-2L14 Battery Pack PC-A10 SCART TV Adapter STV-250N Stereo Video Cable VCR CV-150F/CV-250F DV Cable Digital Device SC-2000 Soft Carrying Case Additional Information 87 Optional Accessories Use of genuine Canon accessories is recommended. [. . . ]