User manual CANON SELPHY CP750

[. . . ] Printer User Guide Printer Features Component Guide and Functions Other Accessories Overview Paper and Accessories Setup Ink Cassette Preparations Getting Ready Paper Cassette Preparations Printing Precautions Printing from Memory Cards Printing from Computers Wireless Printing Battery Instructions (SELPHY CP750 Only) Specifications Printing Printing from Cameras Maintenance, Storage and Transport Appendices Safety Precautions Handling Precautions Having Difficulty?Click Here I'd Like To. . . Troubleshooting Tasks and Index Next Return to Cover Page Overview Getting Ready Printing Appendices Introduction Before using your printer for the first time, read through the "Safety Precautions" (p. 39) and "Handling Precautions" (p. 41). Warning Against Copyright Infringement Please respect all copyrights. [. . . ] Dust will get on the ink sheet if it enters from the air vents, preventing the printer from printing cleanly. If dust becomes lodged on the ink sheet, use a blower brush to remove it so that you do not touch the ink sheet. 1 Remove the ink cassette. 2 Insert the cleaner with the arrow side upward all the way into the slot, then remove it, repeating this two or three times. Slide the cleaner in and out 2 or 3 times. Troubleshooting Tasks and Index 34 Back Next Return to Cover Page Overview Getting Ready Printing Appendices Storage Main Unit · Detach the power cord of the compact power adapter from the power outlet. · Remove the paper and ink cassettes from the printer for storage. Store the paper cassettes with the lids closed. Remove the sheets of paper, place them into their bag and replace them in their box, storing them flat. Store the ink cassette in a bag so that dust does not get on it. Printed Paper · If you store your prints in albums, select albums with photo covers made of nylon, polypropylene or cellophane. Other materials may cause the images to change color or transfer ink. · Avoid storing prints in the following types of places to prevent the image quality from deteriorating. · Places with high temperatures (40°C/104°F or higher) · Places with high humidity or dusty places · Places subject to direct sunlight · Store the printer flat so that dust does not enter into it. · Prints may change color over time depending on their storage conditions and the passing of time. Transport If you must store it vertically, please orient it in this position. · Remove the paper and ink cassettes and close the covers. · Transport the printer wrapped in a soft cloth to avoid scratching it. Dust entering the printer may prevent it from printing cleanly. Troubleshooting Tasks and Index 35 Back Next Return to Cover Page Overview Getting Ready Printing Appendices Battery Instructions (SELPHY CP750 Only) You can print at an outside location that lack power outlets if you attach the separately sold battery pack to the SELPHY CP750. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/or explosion of a battery pack). In such cases, this warranty will not apply and repairs of genuine Canon accessories will be conducted on a chargeable basis. Attaching the Battery Use the following procedures to attach Battery Pack NB-CP2L to the printer. 1 Remove the battery pack terminal cover. Battery Pack Terminal Cover 2 Press the battery cover eject lever downward to remove the battery cover from the printer. · Battery Pack NB-CP1L cannot be used in this printer. · Do not use a battery other than that specified by Canon with this product. · Do not lose the battery pack terminal cover. It is required for battery storage. 3 Attach the battery to the printer. Slide the battery in the direction of the first arrow and press in the direction of the second until it clicks into place. Troubleshooting Tasks and Index 36 Back Next Return to Cover Page Overview Getting Ready Printing Appendices Charging the Battery Use the following procedures to charge the battery. 3 After the battery is charged, detach the connector of the compact power adapter from the printer. The battery is now ready to power the printer. 1 Attach the battery to the printer. 2 Connect the power cord to the compact power adapter and plug it in a power outlet. Connect the compact power adapter connector to the printer. Indicator To a power outlet · It takes approximately 2 hours 30 minutes to bring a depleted battery pack to a full charge state (based on standard Canon testing criteria). - Charge it within a temperature range of 5 to 40 °C (41 to 104 °F). - The charging time varies according to the ambient temperature and charge state. · The printer will automatically turn off when powered by the battery if the printer is not used for five minutes or more. While the battery is charging, the indicator will light orange. When charging is complete, the indicator will turn off. The battery will cease charging if you turn on the printer during the process. When you turn the printer off again, it will resume charging. Detaching the Battery 1 Press the battery cover eject lever downward to remove the battery. Troubleshooting Tasks and Index 37 Back Next Return to Cover Page Overview Getting Ready Printing Appendices 2 Attach the battery pack terminal cover onto the battery. Battery Handling To protect the battery and prevent a decline in performance, do not charge it continuously for more than 24 hours. 3 Attach the battery cover onto the printer. Push the battery cover in the direction indicated by the arrow until it clicks into place. · This is a lithium ion battery pack so there is no need to completely use or discharge it before recharging. · It can be charged at any charge state. · You are advised to charge the battery on the day of use, or one day before, to ensure a full charge. · Even charged battery packs continue to discharge naturally. · The battery life should be considered over when the usable time is severely limited even after the prescribed charging time. · Replace it with a new battery. Battery Storage · After you finish using the battery, attach the battery pack terminal cover and store it at a cool temperature (0°-30°C/32°-86°F). Storing the battery fully charged for long periods of time (about 1 year) shortens the battery life and causes its performance to decline. When you do not use it for long period of time, fully charge it once a year and store after fully discharging it in the printer. Remaining Battery Charge The printer indicator will begin to blink orange when the battery charge is low. In addition, a message may appear on a connected camera's LCD monitor or the printer's LCD monitor. [. . . ] Check the printer and camera positions and their distance from each other and redo the procedure. Troubleshooting Tasks and Index 48 Back Next Return to Cover Page Overview Getting Ready Printing Appendices Tasks and Index Click the page number of a topic to jump to that topic. I want to print the shooting date on the photo. 20 I want to know if I can connect the printer to my computer. p. 27 I want to print images from my mobile telephone. p. 32 I want to know which types of paper are sold. [. . . ]