User manual CANON SELPHY CP900

[. . . ] 2012 Printer User Guide ENGLISH OO Make sure you read this guide including the “Safety Precautions” section before using the printer. OO Read this guide carefully for the correct use of the printer. OO Keep this guide handy for future reference. Package Contents Check if the following items are included in your printer package, using the □ check boxes. [. . . ] The printing result may be incomplete or incorrect. OO Select an access point on which security is not set in Step 4 and press the o button to display the screen for Step 6. oO Up to 20 access points can be displayed. If you cannot find the access point you want to connect to, press the v button and select [Manual Settings] in Step 3 described on p. ‌32 to specify the access point manually. Follow the instruction on the screen to enter the SSID, security settings, and encryption key (p. OO On the screen, wireless signal strength is indicated by the following icons. ] high, [ ] medium, [ ] low, [ ] weak or no service [ Printing for the Second Time OO Once you have configured settings, the second screen in Step 6 (Ready screen) is displayed when you turn the power on. If you could not connect to the specified wireless LAN for some reason such as the access point being turned off, the Ready screen with "Reconnect" displayed at the bottom appears. Check the access point setting and press the o button to try again. OO Even when the Ready screen is displayed, you can insert the memory card (p. €13) to display the screen in Step 4 and print images in the card. OO You can stop displaying the Ready screen when you turn the power on by selecting [Disable Wireless LAN] in [Comm. OO If you failed to connect to an access point to which you had once connected, check the channel setting on the access point (p. 33 Printing on Square Stickers OO You can print square images on stickers using Color Ink Cassette/Square Label Set KC-18IS (p. OO Specify borderless printing in the smartphone's application or on the camera when printing on square stickers (the [Borders] setting on SELPHY will be ignored except when the border setting on the camera is at its default). Using a WPS Compatible Access Point You can connect the printer to the wireless LAN easily when your access point is WPS compatible. € 1 – ‌ 2, press the ud buttons, 3 3 select [WPS Connection], and then press the o button. OO Press the ud buttons to select [PBC Method] and press the o button. OO Check that the screen on the left is displayed on the printer and then press and hold the button for WPS connection on the access point for a few seconds. ] is displayed on the printer screen, and then [Connected to access point] is displayed when connected. OO When connected, the screen for Step 6 described on p. [. . . ] OO Visa skärmen till vänster genom att genomföra steg 2 till 4 som beskrivs på s. OO Skärmen till vänster visas när du är ansluten till kopplingspunkten. OO Om du skriver ut från en mobil enhet måste du först installera appen, ansluta till den mobila enheten till kopplingspunkten och sedan kan du skriva ut. Om det inte gick att ansluta till det trådlösa nätverket om till exempel kopplingspunkten är avstängd visas ”Reconnect/Återanslut” längst ned på skärmen. [. . . ]