User manual CANON STAMPANTI PER GRANDI FORMATI [RANGE] BROCHURE

[. . . ] NOTE Document feeder ADF tray Operation panel · Do not remove the USB label on the back of the machine at this stage. USB label Assemble the machine. 1 Insert the tabs of document output tray C into the slots on the back of the machine. 2 Attach the extension cover F on the back of the machine. 5 Insert the output tray D into the corresponding slots. 4 Insert the paper cassette into the machine. 3 Pull out the paper cassette, and attach the cassette extension E to the cassette. Load paper. 1 Pull out the paper cassette. 2 Adjust the rear paper end guide to match the paper size. Make sure the paper stack sits below the hooks. [. . . ] Make sure the paper stack sits below the hooks. 4 Adjust the blue side paper end guides to match the paper size. Make sure the height of the paper stack does not exceed the limit marks . 5 Insert the cassette into the machine as far as it will go. HOOK HOOK · If you do not completely insert the cassette into the machine, paper jams may occur. · For details, see p. 4-3 of the Basic Guide. · After you have loaded plain paper in the cassette, you can make sure the machine is printing properly by making several copies of a document. For instructions, see Chapter 10, "Making Copies. " · Do not load paper from the rear of the cassette. NOTE Attach the handset cradle to the machine. 1 Insert the plugs with pins into the holes on the handset cradle. 2 Insert the plugs with the handset cradle in the holes on the machine. 3 Carefully push the pins into the plugs as far as they will go. NOTE · If you have difficulty inserting the plugs, turn the machine so that the left side is facing you and the right side is placed against a wall. This will allow you to insert the plugs without the machine moving. · If the pins are not pushed fully into the plugs, the handset cradle will not be securely attached to the machine. Connect the handset and telephone line cord. Connect external devices as follows: = Handset jack = External device jack = Telephone line jack · Telephone or answering machine Telephone or answering machine Telephone line Machine Telephone line cord Connect the supplied telephone line to the jack. IMPORTANT · Before sending a fax, you MUST register the fax number, your name, and the current date and time in the machine. 3-3 of the Basic Guide. NOTE · For details on setting fax receive mode, see p. 7-1 of the Basic Guide. Install the Printer Driver. (Windows 98/Me/2000/XP) IMPORTANT · DO NOT connect the USB cable before installing the software. NOTE · When installing the software in Windows XP or Windows 2000, log onto the system as a member of the Administrator group. · If the Found New Hardware Wizard appears, click [Cancel], and follow this procedure. 1 Insert the CD-ROM into your CD-ROM drive. 2 Click [Install Printer Driver] to start installation. The setup wizard starts. 3 Follow the on-screen instructions to complete the installation process. During installation, follow these guidelines: · Click [Next] or [Yes] to move from one dialog box to the next. · Be sure to wait for Windows to complete each setup step. If you hear the computer working, wait until it is done. [. . . ] · Be sure to wait for Windows to complete each setup step. If you hear the computer working, wait until it is done. 4 When prompted, connect the USB cable to the machine and your computer after removing the USB label. USB cable USB label USB port The printer driver is installed and the printer icon is added to the [Printers] folder. IMPORTANT · The USB cable must be connected within 90 seconds to your computer port after [Yes] in the [USB Connection] dialog box is clicked, otherwise the installation will not complete. For more information on connecting the USB cable, refer to the Basic Guide. NOTE · While the printer driver is being installed, a message appears to view the README file. [. . . ]