User manual CANON SURE SHOT 130U SURESHOT 130U MANUAL

[. . . ] Please read and ensure that you understand them before proceeding to other sections of the guide. Warnings This symbol indicates topics that could lead to death or serious injury if ignored or handled incorrectly. Warnings · Do not play the supplied CD-ROM(s) in any CD player that does not support data CDROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer from hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player. Disclaimer · While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. [. . . ] My Camera Settings can be selected and saved in either of two ways to the computer: individually or in theme sets. 1 Confirm that the [Setup as a theme] tab is selected in the My Camera window. To save the settings individually, select the [Set individually] tab and select the setting type in the [Data Type] list box. Select the settings file(s) from the Camera list that you wish to save to the computer. If you are working in the [Setup as a theme] tab, the thumbnail (tiny version) of the start-up image will display to the right and the sound files will play in the order of start-up sound, shutter sound, operation sound and self-timer sound. Add a name to the settings file you are saving and click [OK]. This concludes the process of saving the My Camera settings to the computer. Repeat steps 1-3 as required. 2 3 4 51 Adding New Data to the My Camera Window To add new data to the My Camera window, you need to create it, save it to the computer and add that file to the My Camera window. Create an Original Start-up Image File and then Add It Start by using an image editing program to create the image file that will become the start-up image and save it to the computer. Create the file in the JPEG format at a size of (w) 320 x (h) 240 pixels. Once you have created the data and saved it to the computer, use the following procedures to add it to the My Camera window. Windows - Advanced Techniques - 1 Open the My Camera window, click the [Set individually] tab, select [Startup Image] from [Data Type] and click the [Add File] button. This will display a dialog for opening files. 2 Select the file you created and click [Open]. The selected file will appear in the Computer list. This concludes the process for adding new data. 2 Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. 3 Double-click the CD-ROM icon, followed by the [Mac OS X] and [Canon Digital Camera Installer] icons. With Mac OS 9, double-click the CD-ROM icon, followed by the [Mac OS 9] and [Canon Digital Camera Installer] icons. The installer panel will display automatically. 4 Click [Digital Camera Software Installation]. Installer Panel This will start the installation. Follow the onscreen instructions to proceed with the installation. 57 5 Remove the disk from the CD-ROM drive when the installation is complete. See Uninstalling the Software (p. 93) to delete the software installed with these procedures. This concludes the software installation. Continue by downloading images to the computer (p. 67). Macintosh - Preparations - 58 MEMO 59 Using the Software on the Macintosh Platform - The Basics This chapter explains the procedures for using ImageBrowser to download the camera's images to the computer and print them. Read this chapter after completing the preparations in the Using the Software on the Macintosh Platform - Preparations - section. Macintosh - The Basics - 60 Starting ImageBrowser Starting ImageBrowser Begin by starting up ImageBrowser. The startup procedures vary according to whether you are connecting the camera to the computer or using a memory card reader. Camera to Computer Connection Mac OS X 1 Attach the supplied USB cable to the computer's USB port and the camera's Digital Terminal. Prepare the camera for communication with the computer. [. . . ] Copy the image folders in C:\Program Files\Canon\ZoomBrowser EX\Library One to another location. ) The moved folder images can now be selected and displayed with ZoomBrowser EX 4. Windows/Macintosh 104 Troubleshooting 105 Windows/Macintosh Information about Your Camera The software package and the procedures for connecting to a computer and preparing for data transfers vary between camera models. Certain software functions may also not be supported by some camera models. Read this section to confirm the capabilities of your camera model. 106 Information Common to All Models Information Common to All Models See the respective page for your camera model for information specific to that model (pp. 108 - 109). Programs and Compatible Operating Systems The CD-ROM labeled "Canon Digital Camera Solution Disk" is provided with all models. [. . . ]