User manual CANON VB-M700F BROCHURE

[. . . ] LOS ANGELES OFFICE 15955 Alton Parkway, Irvine, CA 92618 USA CANON U. S. A. , INC. HONOLULU OFFICE 210 Ward Avenue, Suite 200 Honolulu, HI 96814 USA User's Manual If you have any questions, call the Canon U. S. A. Information Center toll-free at 1-800-828-4040(U. S. A. only) CANADA CANON CANADA INC. NATIONAL HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7 CANON CANADA INC. CALGARY 2828, 16th Street, N. E, Calgary, Alberta T2E 7K7 CANON CANADA INC. [. . . ] Log Viewer simplifies the reading of log files and provides management and resolution of errors. Log Viewer not only displays all logs, it is also capable of filtering so that only the required information is displayed. Viewing Logs When Log Viewer is started up from the VBAdmin Startup Panel, it automatically retrieves the most recent log file and displays the recent logs. The following content is displayed in the log. For error codes, refer to page 7-4 of the User's Manual. Error codes are displayed with one of four types of icons according to level. "Information level" "Error level" "Warning level" "Unknown" Date & Time The date and time when the log was generated is displayed. Message Log messages are displayed. Using selection criteria to display logs Logs can be filtered according to type, code, or date and time so that only the required information is displayed. Choose "Filter" from the View menu. 4-22 Log Viewer 2. Set the following selection criteria and click the "OK" button to display only the logs that match those criteria. If filtering is not required, click the "Cancel" button. [Error Type] If logs are to be filtered according to type of error, select the "Specify Type" or "Specify Code"; if not, select the "Not Specified". Specify Type Specifying the levels of the logs From Error, Warning, and Information, select the error levels to be displayed. Specifying the modules that output the logs From Application, HTTP Sever, System, and Driver, select the output source modules to be displayed. Specify Code Specify the error code of the logs. When the "Setup properties" dialog box appears, click the "Display option" tab. Check to be sure the "Display notification message for external device input" check box is selected, then click the "OK" button. Displaying and Saving the External Device Input Status The external device input status can be displayed and, when required, saved as a log. 1. Choose "External Device Input" from the Privilege menu. To Make Settings. . . Note VB Administration Tools A message appears in the event a change occurs in the external device input status. If the Admin Viewer is minimized or in full screen mode, the notification message for external device input appears after the normal display is restored. Also, this message is not displayed when the "External Device Input" dialog box ( P. 4-26) is displayed. To Make Settings. . . 4-25 Admin Viewer 2. The "External Device Input" dialog box appears. To save this content as a log, click the "Save" button, then specify a file name and where it should be saved. To clear the content in the display, click the "Clear" button. To close the dialog box, click the "Close" button. Operating External Device Output The ON/OFF status of external device output to an external output device such as a light can be changed. 1. Click "Control" button to retrieve the camera control privileges, and choose "External Device Output" from the Privilege menu. The "External Device Output" dialog box appears. The external device output status can be changed using the ON/OFF buttons for each terminal. To close the dialog box, click the "Close" button. Enabling/Disabling View Restrictions View restrictions can be enabled or disabled when controlling the camera. Choose either "ON" or "OFF" for View Restriction in the Privilege menu. 4-26 To Make Settings. . . To Make Settings. . . Chapter Creating Web Pages This chapter describes how to use the VB-C10/VB-C10R to webcast information. Picture data can be distributed in various ways, including displaying video or still pictures and displaying multiple images on a Web page. Web Pages for Video Distribution To distribute picture data by VB-C10/VB-C10R, you create a dedicated Web page. The viewers that can be used with the VB-C10/VB-C10R are "Java Viewer (with or without camera control function)" and "Helper Viewer", and detailed parameters can be specified for each of these. [. . . ] 3-22 View restriction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11, 3-12 View restriction settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 View Restriction Tool . . . . . . . . . . . . . . . . . . . . . . . 4-3, 4-12 View Restriction Tool display screen . . . . . . [. . . ]