User manual CANON VC-C50I-VC-C50IR

[. . . ] INSTRUCTION MANUAL ENGLISH Introduction Thank you for purchasing the Canon Communication Camera VC-C50i/VC-C50iR. Please read this Instruction Manual carefully to ensure that you use the Product correctly and safely. Read the "a Safe Use of Equipment" section first and observe these instructions when you use the Product. Features of the VC-C50i/VC-C50iR Communication Camera Genuine Canon 26× optical zoom and 12× digital zoom for highmagnification imaging Capable of shooting at low light levels down to 1 lux Built-in infrared light allows shooting even at 0 lux (Night mode) High-speed high-precision camera head movement Noise reduction circuitry for crystal clear images 2 Introduction Notice This product uses a microcomputer. External radio frequency energy, may cause picture interference, avoid using this product in such a location. Exclusion of Liability If the Product is connected to a recording device (for example a VCR), Canon Inc. [. . . ] BRIGHT button ( P. 24) Adjusts the brightness of the image on the monitor. SET/OK button ( P. 25, 27, 35) Used to store preset positions. Can also be used to proceed to the next level when specifying settings in a setting menu. FOCUS button ( P. 23, 24) Adjusts the focus. · : Lengthens the focal distance. · : Shortens the focal distance. ZOOM button ( P. 22) Increases or decreases the size of the subject on the monitor screen. · T : Enlarges the subject (zoom in). · W : Shrinks the subject (zoom out). Camera control button ( P. 21, 27, 35) Used to change the camera head angle and to move the on-screen cursor. · ^ V < > : Move the camera head up, down, left and right respectively. · HOME : Moves the camera head to the center. CANCEL button ( P. 25, 27, 35) Cancels registration of a preset camera position. Also cancels a setting selected in a setting menu and returns you to the previous level. Number buttons ( P. 25, 36, 37) Used to store and restore preset positions, and to select the camera when multiple cameras are used. MENU button ( P. 27, 35) Used to display and exit the MAIN MENU. ID button (P. 36, 37) Used to control multiple cameras individually. When the cameras are switched off, pressing this button begins individual camera control. BRIGHT ZOOM T W SET/OK CANCEL AF MF 1 4 7 2 5 8 0 ID 3 6 9 MENU ON SCREEN Fn WIRELESS CONTROLLER WL-V5 ON SCREEN button ( P. 27, 29) Displays or hides the date, time and text. Fn button Not used. Battery cover See P. 20 for information on loading the batteries. MEMO Whenever possible, switch the camera off when it is not in use ( P. 26) as this reduces power consumption. If the camera will not be used for an extended period, unplug the AC adapter from the wall outlet ( P. 18). If you turn the power off, the date and time will be cleared. 19 ENGLISH HOME Controlling the Camera from the Wireless Controller Loading the Batteries into the Wireless Controller The wireless controller requires two AA-type batteries. 1. Remove the battery cover. 2. Insert the batteries. Taking care that the poles (+ and ­) are correctly positioned. 3. Replace the battery cover. aWARNING Observe the following precautions when handling batteries. Failure to do so could result in the batteries bursting or emitting heat, sparks or corrosive fluid. [. . . ] Response: Something has directly moved the camera head. Press the h button on the wireless controller. P. 21 Check 2: The range of pan/tilt movement has been changed since the preset position was stored. Response: Store the preset position again. [. . . ]