User manual CANON VIXIA HF R200 BROCHURE

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] [ Menu] [ Print] · The print menu appears. · If there are no photos marked with print orders, [No print orders have been set] appears. · Depending on the connected printer, you may be able to change some print settings ( 73). The print menu disappears when the printing is completed. NOTES 3 · To cancel the printing, refer to page 74. · Restarting printing: Open the print menu as explained in step 2. In the print settings menu, select [Print]* or [Resume] and press . Printing cannot be restarted when the print order settings have been changed or if you deleted a photo with print order settings. * In case the print order was interrupted after the first photo. 77 External Connections This chapter explains how to connect your camcorder to an external device such as a TV, VCR, or computer. Terminals on the Camcorder HDMI OUT Terminal* Access: Open the rear terminal cover. The HDMI OUT terminal offers a high-quality digital connection that combines audio and video in a single convenient cable. COMPONENT OUT Terminal* Access: Open the front terminal cover. The component video terminal is for video only. Always back up your recordings to the computer and restore the backup files to the camcorder using only the supplied software, ImageMixer 3. Backing Up Your Recordings on a Computer Movies recorded with this camcorder are saved on the hard disk or memory card. Because space is limited, make sure to back up your movies onto a computer on a regular basis. PIXELA ImageMixer 3 SE With the software supplied on the PIXELA ImageMixer 3 SE CD-ROM you can select scenes and back them up on your computer's hard disk. If necessary, backup video files previously saved on a computer can be restored back to the camcorder. ImageMixer 3 offers also many options for organizing your video library, editing video and more. For details about installing the software refer to PIXELA ImageMixer 3 SE Installation Guide. Authoring High-Definition (AVCHD) Discs and Photo DVDs You can connect the camcorder to the optional DW-100 DVD Burner to create high-definition DVD discs (AVCHD specifications). This way, you can preserve your video recordings in the highest video quality available. You can also create Photo DVDs from your photos that you can play back with most standard DVD players. Refer to this section along with the relevant sections in the instruction manual of the DW-100. Saving your Recordings without a Computer The following options are also available: · Use the optional DW-100 DVD Burner to create high-definition (AVCHD) discs of your movies and Photo DVDs of your photos ( 82). · Connect the camcorder to an external recording device (DVD or HDD recorder, VCR, etc. ) to save standard- 82 Options for creating AVCHD discs ( mode) [All Scenes] Add all the scenes to the disc(s). [Remaining Scenes] Add only those scenes that have not been previously added to a disc. [Playlist] Add only the scenes included in the playlist ( 58). Connecting to the DW-100 DVD Burner and Creating a Disc 1 2 Turn on the DVD Burner. [. . . ] The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada's option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The Equipment is used for commercial, professional or industrial purposes. [. . . ]