User manual CANON ZR10

[. . . ] 0/3/10 17:31 Page 1 (2, 1) DIGITAL VIDEO CAMCORDER ENGLISH Instruction Manual CAMESCOPE ET LECTEUR VIDEO NUMERIQUES E FRANÇAIS Mode d'emploi VIDEOCAMARA Y GRABADORA DIGITAL F ESPAÑOL Manual de Instrucciones Es Mini Digital Video Cassette NTSC 1_ZR10_E(02-06) 00/3/9 20:29 Page 2 (1, 1) Important Usage Instructions E WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, ZR10 A and Compact Power Adapter, CA-560 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Press the DIGITAL EFFECTS button to open the digital effects menu. Move the arrow up and down with the selector dial. · Point the arrow at FADER. 3. Press the selector dial in. · FADE-T, WIPE , WIPE , M. FADE settings appear. 4. Turn the selector dial. · Point the arrow at your selected setting. 5. Press the DIGITAL EFFECTS button. · The menu disappears and the name of your selected setting flashes in the display. Press the ON/OFF button. · The name of your selection stops flashing. · Each time you press the ON/OFF button, the chosen fader is activated (display lights continuously) or deactivated (display flashes). 7. If you're in camera mode: If you're in VCR mode: Fade in- Press the start/stop button. Fade out- Press the a (pause) button. 56 3_ZR10_E(34-72) 3/9/00 7:56 PM Page 57 (1, 1) Operating effects Sound records/plays back normally. When operating effects while recording, make sure the program selector is set to Q. Press the DIGITAL EFFECTS button to open the digital effects menu. Move the arrow up and down with the selector dial. · Point the arrow at EFFECT. 3. Press the selector dial in. · ART, BLK&WHT, SEPIA and MOSAIC settings appear. 4. Turn the selector dial. · Point the arrow at your selected setting. 5. Press the DIGITAL EFFECTS button. · The menu disappears and the name of your selected setting flashes in the display. If you're playing back, press the e (play) button. Press the ON/OFF button. · The name of your selection stops flashing and takes effect on the display. · Each time you press the ON/OFF button, the chosen effect is activated or deactivated. Using the Full Range of Features 57 3_ZR10_E(34-72) 3/9/00 7:56 PM Page 58 (1, 1) Audio Recording E Selecting the audio mode ZR10 can record sound in two audio modes -- 16-bit and 12-bit. The 16-bit mode produces the higher sound quality (slightly superior to CD) while the 12-bit mode records on two channels (stereo 1), leaving two channels free (stereo 2) for you to add new sound at a later date. AUDIO MODE··12bit ( 35, 36) 1. To switch to the 16-bit mode, open the menu and select AUDIO MODE. Select "16 bit" and close the menu. · "16 bit" is shown in the display for approximately four seconds. · For details on adding new sound, see p. · For details of playing back a tape that has new sound on stereo 2, see p. [. . . ] TO OBTAIN WARRANTY SERVICE Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of the Canon Service Facilities in Canada. LIMITATIONS Except as otherwise required by applicable legislation, this warranty is in lieu of all other warranties, conditions, guarantees or representations, express or implied, statutory or otherwise, relative to this Canon product, including implied warranties or conditions of merchantability or fitness for a particular purpose. Canon Canada assumes no liability for special, consequential or incidental damages or loss that may arise, whether on account of negligence or otherwise, from the use, misuse or inability to use this Canon product (including loss of profit, revenue, video tapes or enjoyment) or from failure to conform to any express or implied warranties, conditions, guarantees or representations. Any recovery under this limited warranty shall not exceed the purchase price of the product. [. . . ]