User manual CANOPUS ADVC110

[. . . ] This includes damage to property and, to the extent permitted by law, damages for personal injury. This warranty is in lieu of all other warranties of merchantability and fitness for a particular purpose. Cautions Please observe the following cautions when using this product. If you have any questions regarding the method of usage, the descriptions herein, or any other concerns, please contact the Canopus Technical Support team from 9am-5pm, Monday-Thursday; 9am-3:30pm Fridays, except for public holidays and company-specific holidays. Warraties Notices & Warraties 2 Notices & Warraties Warraties DANGER The following conditions indicate the potential for serious bodily injury or loss of life. Health precautions In rare cases, flashing lights or stimulation from the bright light of a computer monitor display may trigger temporary epileptic seizures or loss of consciousness. It is believed that even individuals whom have never experienced such symptoms may be susceptible. [. . . ] Canopus, as written in both English and Japanese, and its logo are registered trademarks of Canopus Co. , Ltd. ADVC110 is a trademark of Canopus Co. , Ltd. Windows are registered trademarks of Microsoft Corporation in the US. Other product names and related items are trademarks or registered trademarks of their respective companies. 5 Warraties Notices & Warraties Notices & Warraties Warraties About the Documentation This document is the ADVC110 User Manual. Information not listed in this document may be listed elsewhere. In cases where there is a difference between a description in this document and an actual operation method, the actual operation method takes precedence. This document is written for users capable of performing basic PC operations. If there is no special description of an operation, perform that operation in the same manner as a general PC operation. This document refers to Microsoft's Windows 2000 operating system as Windows 2000. To simplify the descriptions, the actual product may differ from the illustrations and screenshots. Warraties Notices & Warraties 6 Chapter 1 Basic Instructions The ADVC110 is a simple solution for converting your analog tapes, such as VHS and S-VHS, to DV in realtime. This manual guides you through the basics of analog/digital conversion. Package contents include: ADVC110 unit FireWire Cable (6 pin-6 pin) Basic Instructions QuickStart If you want to jump right in and use the ADVC110, simply plug it in and follow these steps. Info If you are capturing PAL video, you need to change the DIP switch settings. For more info, see Setting DIP switches on page 16. 1. Insert the FireWire cable (6 pin - 6 pin) to the DV IN/OUT terminal on the rear panel, to connect the ADVC110 unit to your computer. Basic Instructions 8 2. If you are capturing video from an analog video, make sure the ADVC110 is set to Analog In and that the video is connected to the unit's S-Video or composite ports on the front of the unit. If you are exporting video to an analog video, make sure the ADVC110 is set to Digital In and that the video is connected to the unit's S-Video or composite ports on the back of the unit. You can now open your editing application and begin capturing video. Basic Instructions ADVC110 Basics The front of the ADVC110 contains inputs for composite, S-Video and DV. The DV input is a 4-pin FireWire port and can do both input and output. Input Select button The Input Select button on the top of the unit lets you toggle between Digital In and Analog In modes. A blue light signifies which mode the ADVC110 is using. The Input Select button will not work while the both status lights are blinking. Info Connected to a PC with an IEEE 1394 cable, ADVC110 can operate without the AC adapter. In other cases, use an official AC adapter (optional) for the power supply. In case the bus power is too low, the AC adapter is also required. Digital In - Indicates that the ADVC110 is ready to receive digital video. [. . . ] (4-channel mixing mode) Setting 4-channel mixing mode 1. Press and hold the Input Select button when turning on the unit. The STATUS LED is lit, when the ADVC110 is in Digital IN mode. Bus power If you connect the ADVC110 unit to your computer with only the 6-pin FireWire cable, it can be powered by the FireWire port and doesn't need the AC Adapter. If the ADVC110 unit is always connected to your system, it will automatically be turned on or off, whenever you start up or shut down your computer. Macrovision detection When Macrovision signals are detected by the ADVC110: The brightness and contrast for both analog and DV output are lowered. [. . . ]